lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] arm64: dts: imx8mq: Init rates and parents configs for clocks
Date
On 25.06.2019 15:51, Abel Vesa wrote:
> Add the initial configuration for clocks that need default parent and rate
> setting. This is based on the vendor tree clock provider parents and rates
> configuration except this is doing the setup in dts rather then using clock
> consumer API in a clock provider driver.
>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 34 +++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index d09b808..e0abe02 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -489,6 +489,40 @@

> + <&clk IMX8MQ_CLK_PCIE1_CTRL>,
> + <&clk IMX8MQ_CLK_PCIE1_PHY>,
> + <&clk IMX8MQ_CLK_PCIE2_CTRL>,
> + <&clk IMX8MQ_CLK_PCIE2_PHY>,
> + <&clk IMX8MQ_CLK_CSI1_CORE>,
> + <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> + <&clk IMX8MQ_CLK_CSI1_ESC>,
> + <&clk IMX8MQ_CLK_CSI2_CORE>,
> + <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
> + <&clk IMX8MQ_CLK_CSI2_ESC>;

This stuff (and NAND) looks like it would belong to device nodes instead.

The rest seem fine though I'm not sure why exactly those clks are
adjusted in vendor tree.

--
Regards,
Leonard

\
 
 \ /
  Last update: 2019-06-25 16:23    [W:0.030 / U:4.472 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site