lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/3] scsi: ufs: Introduce vops for resetting device
From
Date
Hi Bjorn,
Are you planning to address Bean's comment on patch#2 and want to
re-spin this series?
I am ok with taking this patch as it is and take a Softreset patch as a
separate patch.

On 6/8/19 10:34 AM, Bjorn Andersson wrote:
> Some UFS memory devices needs their reset line toggled in order to get
> them into a good state for initialization. Provide a new vops to allow
> the platform driver to implement this operation.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
feel free to add
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
>
> Changes since v2:
> - New patch, to allow moving implementation to platform driver
>
> drivers/scsi/ufs/ufshcd.c | 6 ++++++
> drivers/scsi/ufs/ufshcd.h | 8 ++++++++
> 2 files changed, 14 insertions(+)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 04d3686511c8..ee895a625456 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -6191,6 +6191,9 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba)
> int retries = MAX_HOST_RESET_RETRIES;
>
> do {
> + /* Reset the attached device */
> + ufshcd_vops_device_reset(hba);
> +
> err = ufshcd_host_reset_and_restore(hba);
> } while (err && --retries);
>
> @@ -8322,6 +8325,9 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
> goto exit_gating;
> }
>
> + /* Reset the attached device */
> + ufshcd_vops_device_reset(hba);
> +
> /* Host controller enable */
> err = ufshcd_hba_enable(hba);
> if (err) {
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 994d73d03207..cd8139052ed6 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -298,6 +298,7 @@ struct ufs_pwr_mode_info {
> * @resume: called during host controller PM callback
> * @dbg_register_dump: used to dump controller debug information
> * @phy_initialization: used to initialize phys
> + * @device_reset: called to issue a reset pulse on the UFS device
> */
> struct ufs_hba_variant_ops {
> const char *name;
> @@ -326,6 +327,7 @@ struct ufs_hba_variant_ops {
> int (*resume)(struct ufs_hba *, enum ufs_pm_op);
> void (*dbg_register_dump)(struct ufs_hba *hba);
> int (*phy_initialization)(struct ufs_hba *);
> + void (*device_reset)(struct ufs_hba *);
> };
>
> /* clock gating state */
> @@ -1045,6 +1047,12 @@ static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
> hba->vops->dbg_register_dump(hba);
> }
>
> +static inline void ufshcd_vops_device_reset(struct ufs_hba *hba)
> +{
> + if (hba->vops && hba->vops->device_reset)
> + hba->vops->device_reset(hba);
> +}
> +
> extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];
>
> /*
>

\
 
 \ /
  Last update: 2019-06-25 15:03    [W:0.070 / U:46.840 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site