lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] can: mcp251x: add error check when wq alloc failed
Date
add error check when workqueue alloc failed, and remove
redundant code to make it clear

Signed-off-by: Weitao Hou <houweitaoo@gmail.com>
---
drivers/net/can/spi/mcp251x.c | 49 ++++++++++++++++-------------------
1 file changed, 22 insertions(+), 27 deletions(-)

diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index 44e99e3d7134..2aec934fab0c 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -664,17 +664,6 @@ static int mcp251x_power_enable(struct regulator *reg, int enable)
return regulator_disable(reg);
}

-static void mcp251x_open_clean(struct net_device *net)
-{
- struct mcp251x_priv *priv = netdev_priv(net);
- struct spi_device *spi = priv->spi;
-
- free_irq(spi->irq, priv);
- mcp251x_hw_sleep(spi);
- mcp251x_power_enable(priv->transceiver, 0);
- close_candev(net);
-}
-
static int mcp251x_stop(struct net_device *net)
{
struct mcp251x_priv *priv = netdev_priv(net);
@@ -940,37 +929,43 @@ static int mcp251x_open(struct net_device *net)
flags | IRQF_ONESHOT, DEVICE_NAME, priv);
if (ret) {
dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
- mcp251x_power_enable(priv->transceiver, 0);
- close_candev(net);
- goto open_unlock;
+ goto out_close;
}

priv->wq = alloc_workqueue("mcp251x_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM,
0);
+ if (!priv->wq) {
+ ret = -ENOMEM;
+ goto out_clean;
+ }
INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler);
INIT_WORK(&priv->restart_work, mcp251x_restart_work_handler);

ret = mcp251x_hw_reset(spi);
- if (ret) {
- mcp251x_open_clean(net);
- goto open_unlock;
- }
+ if (ret)
+ goto out_free_wq;
ret = mcp251x_setup(net, spi);
- if (ret) {
- mcp251x_open_clean(net);
- goto open_unlock;
- }
+ if (ret)
+ goto out_free_wq;
ret = mcp251x_set_normal_mode(spi);
- if (ret) {
- mcp251x_open_clean(net);
- goto open_unlock;
- }
+ if (ret)
+ goto out_free_wq;

can_led_event(net, CAN_LED_EVENT_OPEN);

netif_wake_queue(net);
+ mutex_unlock(&priv->mcp_lock);

-open_unlock:
+ return 0;
+
+out_free_wq:
+ destroy_workqueue(priv->wq);
+out_clean:
+ free_irq(spi->irq, priv);
+ mcp251x_hw_sleep(spi);
+out_close:
+ mcp251x_power_enable(priv->transceiver, 0);
+ close_candev(net);
mutex_unlock(&priv->mcp_lock);
return ret;
}
--
2.18.0
\
 
 \ /
  Last update: 2019-06-25 14:52    [W:0.031 / U:0.380 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site