lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] drm/bridge: adv7511: Attach to DSI host at probe time
From
Date
On 24.04.2019 15:22, Matt Redfearn wrote:
> In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel
> which attach to the DSI host via mipi_dsi_attach() at probe time, the
> ADV7533 bridge device does not. Instead it defers this to the point that
> the upstream device connects to its bridge via drm_bridge_attach().
> The generic Synopsys MIPI DSI host driver does not register it's own
> drm_bridge until the MIPI DSI has attached. But it does not call
> drm_bridge_attach() on the downstream device until the upstream device
> has attached. This leads to a chicken and the egg failure and the DRM
> pipeline does not complete.
> Since all other mipi_dsi_device drivers call mipi_dsi_attach() in
> probe(), make the adv7533 mipi_dsi_device do the same. This ensures that
> the Synopsys MIPI DSI host registers it's bridge such that it is
> available for the upstream device to connect to.
>
> Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
>
> ---
>
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index e7ddd3e3db9..ea36ac3a3de 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -874,9 +874,6 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
> &adv7511_connector_helper_funcs);
> drm_connector_attach_encoder(&adv->connector, bridge->encoder);
>
> - if (adv->type == ADV7533)
> - ret = adv7533_attach_dsi(adv);
> -
> if (adv->i2c_main->irq)
> regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
> ADV7511_INT0_HPD);
> @@ -1222,7 +1219,11 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> drm_bridge_add(&adv7511->bridge);
>
> adv7511_audio_init(dev, adv7511);
> - return 0;
> +
> + if (adv7511->type == ADV7533)
> + return adv7533_attach_dsi(adv7511);
> + else
> + return 0;


It seems that on failure of adv7533_attach_dsi cleanup is not performed.

Beside this change looks OK, but it would be good to test it on
platforms with adv7533.


Regards

Andrzej


>
> err_unregister_cec:
> i2c_unregister_device(adv7511->i2c_cec);


\
 
 \ /
  Last update: 2019-06-25 12:54    [W:0.049 / U:3.216 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site