lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[patch v3 2/5] build configuration for AST2500 DMA UART driver
Date
From: sudheer veliseti <sudheer.open@gmail.com>

build config for DMA based UART driver in AST2500.
Total Available UARTs in AST2500 are 4

Signed-off-by: sudheer veliseti <sudheer.open@gmail.com>
---

Changes in v3:
- change logs added

drivers/tty/serial/8250/Kconfig | 35 +++++++++++++++++++++++++++++++-
drivers/tty/serial/8250/Makefile | 1 +
2 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 15c2c5463835..c793466a1c47 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -45,7 +45,7 @@ config SERIAL_8250_DEPRECATED_OPTIONS
keep the 8250_core.* options around until they revert the changes
they already did.

- If 8250 is built as a module, this adds 8250_core alias instead.
+ If 8250 is built as a module, this adds 8250_core alias instead.

If you did not notice yet and/or you have userspace from pre-3.7, it
is safe (and recommended) to say N here.
@@ -189,6 +189,39 @@ config SERIAL_8250_RUNTIME_UARTS
with the module parameter "nr_uarts", or boot-time parameter
8250.nr_uarts

+config AST_SERIAL_DMA_UART
+ tristate "AST UART driver with DMA"
+ select SERIAL_CORE
+ help
+ UART driver with DMA support for Aspeed BMC AST25XX.
+ this driver supports UARTs in AST2500,AST2600. It uses
+ DMA channel of DMA engines present in these chips.
+ since this dma engine is used only by UARTs it is not
+ added as a separate DMA driver instead added as a layer
+ within UART driver.
+
+
+config AST_NR_DMA_UARTS
+ int "Maximum number of uart dma serial ports"
+ depends on AST_SERIAL_DMA_UART
+ default "4"
+ help
+ Set this to the number of serial ports you want the driver
+ to support. This includes any ports discovered via ACPI or
+ PCI enumeration and any ports that may be added at run-time
+ via hot-plug, or any ISA multi-port serial cards.
+
+config AST_RUNTIME_DMA_UARTS
+ int "Number of uart dma serial ports to register at runtime"
+ depends on AST_SERIAL_DMA_UART
+ range 0 AST_NR_DMA_UARTS
+ default "4"
+ help
+ Set this to the maximum number of serial ports you want
+ the kernel to register at boot time. This can be overridden
+ with the module parameter "nr_uarts", or boot-time parameter
+ 8250.nr_uarts
+
config SERIAL_8250_EXTENDED
bool "Extended 8250/16550 serial driver options"
depends on SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 18751bc63a84..54d40e5c6e2a 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_SERIAL_8250_LPSS) += 8250_lpss.o
obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o
obj-$(CONFIG_SERIAL_8250_MOXA) += 8250_moxa.o
obj-$(CONFIG_SERIAL_8250_PXA) += 8250_pxa.o
+obj-$(CONFIG_AST_SERIAL_DMA_UART) += 8250_ast2500_uart_dma.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += 8250_of.o

CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
--
2.17.1
\
 
 \ /
  Last update: 2019-06-25 12:43    [W:0.094 / U:49.880 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site