[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v5 2/5] net: macb: add support for sgmii MAC-PHY interface
On Tue, Jun 25, 2019 at 09:26:29AM +0000, Parshuram Raju Thombare wrote:
> >In which case, gem_phylink_validate() must clear the support mask when
> >SGMII mode is requested to indicate that the interface mode is not
> >supported.
> >The same goes for _all_ other PHY link modes that the hardware does not
> >actually support, such as PHY_INTERFACE_MODE_10GKR...
> If interface is not supported by hardware probe returns with error, so we don't
> net interface is not registered at all.

That does not negate my comment above.

RMK's Patch system:
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to 11.9Mbps down 500kbps up

 \ /
  Last update: 2019-06-25 11:30    [W:0.038 / U:45.676 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site