lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] pinctrl: qcom: Add irq_enable callback for msm gpio
On Mon, Jun 17, 2019 at 11:35 AM Neeraj Upadhyay <neeraju@codeaurora.org> wrote:

> From: Srinivas Ramana <sramana@codeaurora.org>
>
> Introduce the irq_enable callback which will be same as irq_unmask
> except that it will also clear the status bit before unmask.
>
> This will help in clearing any erroneous interrupts that would
> have got latched when the interrupt is not in use.
>
> There may be devices like UART which can use the same gpio line
> for data rx as well as a wakeup gpio when in suspend. The data that
> was flowing on the line may latch the interrupt and when we enable
> the interrupt before going to suspend, this would trigger the
> unexpected interrupt. This change helps clearing the interrupt
> so that these unexpected interrupts gets cleared.
>
> Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
> Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>

Overall this looks good to me, waiting for Bjorn's review.

> Changes since v1:
> - Extracted common code into __msm_gpio_irq_unmask().

Please don't name functions __like __that.

> -static void msm_gpio_irq_unmask(struct irq_data *d)
> +static void __msm_gpio_irq_unmask(struct irq_data *d, bool status_clear)

Instead of __unclear __underscore __semantic use something
really descriptive like

static void msm_gpio_irq_clear_irq()

That is what it does, right?

Other than that it looks fine.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2019-06-25 11:00    [W:0.059 / U:28.700 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site