lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 10/17] PM / devfreq: tegra30: Don't enable consecutive-down interrupt on startup
Date
The consecutive-down event tells that we should perform frequency
de-boosting, but boosting is in a reset state on start and hence the
event won't do anything useful for us and it will be just a dummy
interrupt request.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/devfreq/tegra30-devfreq.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index b36d5d644c6e..1e704289c129 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -556,7 +556,6 @@ static void tegra_actmon_configure_device(struct tegra_devfreq *tegra,
<< ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_NUM_SHIFT;
val |= ACTMON_DEV_CTRL_AVG_ABOVE_WMARK_EN;
val |= ACTMON_DEV_CTRL_AVG_BELOW_WMARK_EN;
- val |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
val |= ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
val |= ACTMON_DEV_CTRL_ENB;

--
2.22.0
\
 
 \ /
  Last update: 2019-06-26 03:35    [W:0.063 / U:5.648 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site