lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] dt-bindings: power: supply: Add documentation for the VINDPM properties
Hi,

On Thu, Jun 13, 2019 at 05:09:06PM -0600, Rob Herring wrote:
> On Mon, May 20, 2019 at 11:07:12AM -0700, Angus Ainslie (Purism) wrote:
> > Add documentation on how to control VINDPM from the devicetree.
> >
> > Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
> > ---
> > .../devicetree/bindings/power/supply/bq25890.txt | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt
> > index dc0568933359..fe8b709dd666 100644
> > --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt
> > +++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt
> > @@ -26,9 +26,15 @@ Optional properties:
> > - ti,use-ilim-pin: boolean, if present the ILIM resistor will be used and the
> > input current will be the lower between the resistor setting and the IINLIM
> > register setting;
> > +- ti,use-vinmin-threshold: boolean, if present the FORCE_VINDPM bit will be set
> > + and the input voltage limit will be configured based on "ti,vinmin-threshold"
>
> Isn't presence of ti,vinmin-threshold enough to determine whether to set
> FORCE_VINDPM or not? Just get rid of the default being 4.4V.
>
> > - ti,thermal-regulation-threshold: integer, temperature above which the charge
> > current is lowered, to avoid overheating (in degrees Celsius). If omitted,
> > the default setting will be used (120 degrees);
> > +- ti,vinmin-threshold: integer, lower absolute threshold for VINDPM. If the
> > + voltage falls below this threshold the charge current is reduced until the
> > + input voltage rises above the input voltage limit. If omitted, the default
> > + setting will be used (4.4V);

We already have a "input-voltage-min-microvolt" property used by
Maxim chargers, please resuse that for the bq25890 instead of
creating a new property name.

-- Sebastian

> >
> > Example:
> >
> > @@ -46,4 +52,6 @@ bq25890 {
> >
> > ti,use-ilim-pin;
> > ti,thermal-regulation-threshold = <120>;
> > + ti,use-vinmin-threshold;
> > + ti,vinmin-threshold = <3900000>;
> > };
> > --
> > 2.17.1
> >
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-06-26 00:13    [W:0.036 / U:11.376 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site