lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] scsi: convert to rst for documenation
On Sat, 22 Jun 2019 22:19:47 +0700
Phong Tran <tranmanphong@gmail.com> wrote:

> - Update to the link in documenation
> - Remove trailing white space
> - Adaptation the sphinx doc syntax
>
> Signed-off-by: Phong Tran <tranmanphong@gmail.com>

Thanks for working to improve the documentation! That said, I think this
patch needs a fair amount of work before we are ready to accept it. I'll
only get partway in, but it should be enough to start with.

The first overall thing I would like to point out (and hopefully the SCSI
folks won't fight me too much on this) is that Documentation/scsi is the
wrong place for much of this stuff. We are doing our best to organize the
documentation with the audience in mind. So, for example, documents that
are of interest to system administrators should go into
Documentation/admin-guide. Information for driver developers should go in
Documentation/driver-api. And so on.

[...]

> diff --git a/Documentation/scsi/link_power_management_policy.rst b/Documentation/scsi/link_power_management_policy.rst
> new file mode 100644
> index 000000000000..170f58c94cac
> --- /dev/null
> +++ b/Documentation/scsi/link_power_management_policy.rst
> @@ -0,0 +1,22 @@
> +SCSI Power Management Policy
> +============================
> +
> +This parameter allows the user to set the link (interface) power management.
> +There are 3 possible options:

This isn't your fault, but...*which* parameter allows this? The document
describes the values, but not where they can be set. That makes it less
than fully useful.

> ++-------------------+------------------------------------------------------+
> +| Value | Effect |
> ++===================+======================================================+
> +| min_power | Tell the controller to try to make the link use the |
> +| | least possible power when possible. This may |
> +| | sacrifice some performance due to increased latency |
> +| | when coming out of lower power states. |
> ++-------------------+------------------------------------------------------+
> +| max_performance | Generally, this means no power management. Tell |
> +| | the controller to have performance be a priority |
> +| | over power management. |
> ++-------------------+------------------------------------------------------+
> +| medium_power | Tell the controller to enter a lower power state |
> +| | when possible, but do not enter the lowest power |
> +| | state, thus improving latency over min_power setting.|
> ++-------------------+------------------------------------------------------+

[...]

> diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.rst
> similarity index 71%
> rename from Documentation/scsi/scsi-changer.txt
> rename to Documentation/scsi/scsi-changer.rst
> index ade046ea7c17..a4923873c77b 100644
> --- a/Documentation/scsi/scsi-changer.txt
> +++ b/Documentation/scsi/scsi-changer.rst
> @@ -1,4 +1,3 @@
> -
> README for the SCSI media changer driver
> ========================================
>
> @@ -10,7 +9,7 @@ common small CD-ROM changers, neither one-lun-per-slot SCSI changers
> nor IDE drives.
>
> Userland tools available from here:
> - http://linux.bytesex.org/misc/changer.html
> + http://linux.bytesex.org/misc/changer.html
>
>
> General Information
> @@ -28,15 +27,17 @@ The SCSI changer model is complex, compared to - for example - IDE-CD
> changers. But it allows to handle nearly all possible cases. It knows
> 4 different types of changer elements:
>
> +::

Two notes:

- You can put the double colon on the line above ("...elements::") and
don't need to make a separate line for it.

- But, more to the point, please avoid the temptation to use a literal
block for something that doesn't actually require that treatment. This
should be reworked as an RST definition list.

> media transport - this one shuffles around the media, i.e. the
> transport arm. Also known as "picker".
> storage - a slot which can hold a media.
> import/export - the same as above, but is accessible from outside,
> i.e. there the operator (you !) can use this to
> fill in and remove media from the changer.
> - Sometimes named "mailslot".
> + Sometimes named "mailslot".
> data transfer - this is the device which reads/writes, i.e. the
> - CD-ROM / Tape / whatever drive.
> + CD-ROM / Tape / whatever drive.

[...]

> diff --git a/Documentation/scsi/scsi-generic.txt b/Documentation/scsi/scsi-generic.rst
> similarity index 70%
> rename from Documentation/scsi/scsi-generic.txt
> rename to Documentation/scsi/scsi-generic.rst
> index 51be20a6a14d..8356810160f0 100644
> --- a/Documentation/scsi/scsi-generic.txt
> +++ b/Documentation/scsi/scsi-generic.rst
> @@ -1,8 +1,10 @@
> - Notes on Linux SCSI Generic (sg) driver
> - ---------------------------------------
> - 20020126
> +=======================================
> +Notes on Linux SCSI Generic (sg) driver
> +=======================================
> +20020126
> +
> Introduction
> -============
> +------------
> The SCSI Generic driver (sg) is one of the four "high level" SCSI device
> drivers along with sd, st and sr (disk, tape and CDROM respectively). Sg
> is more generalized (but lower level) than its siblings and tends to be
> @@ -16,20 +18,20 @@ and examples.
>
>
> Major versions of the sg driver
> -===============================
> +-------------------------------
> There are three major versions of sg found in the linux kernel (lk):
> - - sg version 1 (original) from 1992 to early 1999 (lk 2.2.5) .
> - It is based in the sg_header interface structure.
> + - sg version 1 (original) from 1992 to early 1999 (lk 2.2.5) .
> + It is based in the sg_header interface structure.
> - sg version 2 from lk 2.2.6 in the 2.2 series. It is based on
> - an extended version of the sg_header interface structure.
> + an extended version of the sg_header interface structure.
> - sg version 3 found in the lk 2.4 series (and the lk 2.5 series).
> - It adds the sg_io_hdr interface structure.
> + It adds the sg_io_hdr interface structure.

Perhaps we don't *really* need to preserve information about what versions
were around in the 1990's?

> Sg driver documentation
> -=======================
> +-----------------------
> The most recent documentation of the sg driver is kept at the Linux
> -Documentation Project's (LDP) site:
> +Documentation Project's (LDP) site:
> http://www.tldp.org/HOWTO/SCSI-Generic-HOWTO

That document claims to have been last updated in 2002. Is there really
nothing more recent than that?

> This describes the sg version 3 driver found in the lk 2.4 series.

...and it's unclear to me that users of the 5.x kernel are much concerned
with what was found in 2.4.

That is the problem with this document in general. I suspect that about
the only useful information left in it is the location of the sg3_utils
source. I honestly don't think that it helps the documentation that much
to carry forward ancient information to the RST format.

Of course, doing this right by deleting obsolete information and updating
the documents to reflect current reality is a *lot* more work. Probably
far more than you were thinking of signing up for. If you were willing to
work on this, there may be somebody from the SCSI community who would be in
a position to help you with it.

Unfortunately, the SCSI community probably did not see this patch because
you didn't copy the linux-scsi list. I'll fix that now, but they will not
have seen your original patch. You should be sure to include them on
future postings.

I would like to make a suggestion, in addition to all of the above: rather
than trying to do a mass conversion in a single 4000-line patch, start with
a single file and post a patch doing just that one, being sure to include
the linux-scsi list. That will give everybody something more workable to
start with.

Thanks,

jon

\
 
 \ /
  Last update: 2019-06-25 23:37    [W:0.102 / U:60.000 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site