lkml.org 
[lkml]   [2019]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/10] ARM: davinci: dm355: switch to using the clocksource driver
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now have a proper clocksource driver for davinci. Switch the dm355
platform to using it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
---
arch/arm/mach-davinci/dm355.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a38a3648345b..5de72d2fa8f0 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -30,7 +30,8 @@
#include <mach/cputype.h>
#include <mach/mux.h>
#include <mach/serial.h>
-#include <mach/time.h>
+
+#include <clocksource/timer-davinci.h>

#include "asp.h"
#include "davinci.h"
@@ -620,15 +621,15 @@ static struct davinci_id dm355_ids[] = {
};

/*
- * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
- * T0_TOP: Timer 0, top : clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top : <unused>
+ * Bottom half of timer0 is used for clockevent, top half is used for
+ * clocksource.
*/
-static struct davinci_timer_info dm355_timer_info = {
- .timers = davinci_timer_instance,
- .clockevent_id = T0_BOT,
- .clocksource_id = T0_TOP,
+static const struct davinci_timer_cfg dm355_timer_cfg = {
+ .reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
+ .irq = {
+ DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
+ DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
+ },
};

static struct plat_serial8250_port dm355_serial0_platform_data[] = {
@@ -706,7 +707,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = {
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
.pinmux_pins = dm355_pins,
.pinmux_pins_num = ARRAY_SIZE(dm355_pins),
- .timer_info = &dm355_timer_info,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
};
@@ -733,6 +733,7 @@ void __init dm355_init_time(void)
{
void __iomem *pll1, *psc;
struct clk *clk;
+ int rv;

clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ);

@@ -748,7 +749,8 @@ void __init dm355_init_time(void)
return;
}

- davinci_timer_init(clk);
+ rv = davinci_timer_register(clk, &dm355_timer_cfg);
+ WARN(rv, "Unable to register the timer: %d\n", rv);
}

static struct resource dm355_pll2_resources[] = {
--
2.21.0
\
 
 \ /
  Last update: 2019-06-24 15:15    [W:0.076 / U:50.308 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site