lkml.org 
[lkml]   [2019]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 9/9] ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3
On Sun, Jun 23, 2019 at 12:38:01PM +0800, Icenowy Zheng wrote:
> Lichee zero plus is a core board made by Sipeed, which includes on-board
> TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug
> header, a microUSB slot and a gold finger connector for expansion. It
> can use either Sochip S3 or Allwinner S3L SoC.
>
> Add the basic device tree for the core board, w/o optional onboard
> storage, and with S3 SoC.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> Changes in v3:
> - Drop common regulator DTSI usage and added vcc3v3 regulator.
>
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/sun8i-s3-lichee-zero-plus.dts | 8 ++++
> .../dts/sun8i-s3-s3l-lichee-zero-plus.dtsi | 44 +++++++++++++++++++
> 3 files changed, 53 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
> create mode 100644 arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c4742afe41a7..d24dec29245e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1113,6 +1113,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> sun8i-r16-nintendo-super-nes-classic.dtb \
> sun8i-r16-parrot.dtb \
> sun8i-r40-bananapi-m2-ultra.dtb \
> + sun8i-s3-lichee-zero-plus.dtb \
> sun8i-t3-cqa3t-bv3.dtb \
> sun8i-v3s-licheepi-zero.dtb \
> sun8i-v3s-licheepi-zero-dock.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
> new file mode 100644
> index 000000000000..7d2f6b145190
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
> + */
> +
> +/dts-v1/;
> +#include "sun8i-s3.dtsi"
> +#include "sun8i-s3-s3l-lichee-zero-plus.dtsi"
> diff --git a/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
> new file mode 100644
> index 000000000000..e68f738c3046
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&mmc0 {
> + broken-cd;
> + bus-width = <4>;
> + vmmc-supply = <&reg_vcc3v3>;
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-0 = <&uart0_pb_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&usb_otg {
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usbphy {
> + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};

How can it do OTG if there's no controllable VBUS regulator?

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-06-24 14:43    [W:0.160 / U:1.180 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site