lkml.org 
[lkml]   [2019]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v2 1/2] dt-bindings: display: panel: add auo kd101n80-45na panel bindings
Date
Add documentation for auo kd101n80-45na panel.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
.../display/panel/auo,kd101n80-45na.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt

diff --git a/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
new file mode 100644
index 000000000000..994c2a13f942
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
@@ -0,0 +1,34 @@
+AUO Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,kd101n80-45na"
+- reg: the virtual channel number of a DSI peripheral
+- enable-gpios: a GPIO spec for the enable pin
+- pp1800-supply: core voltage supply
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- backlight: phandle of the backlight device attached to the panel
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+ ...
+ panel@0 {
+ compatible = "auo,kd101n80-45na";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
--
2.21.0
\
 
 \ /
  Last update: 2019-06-24 10:01    [W:0.034 / U:6.144 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site