lkml.org 
[lkml]   [2019]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 1/5] usb: fsl: Set USB_EN bit to select ULPI phy
Date
From: Nikhil Badola <nikhil.badola@freescale.com>

Set USB_EN bit to select ULPI phy for USB controller version 2.5

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
Change in v2:
replace Yinbo.Zhu with Yinbo Zhu.
Change in v3:
Code base already has patch[5/6], so remove it.
Change in v4:
Incorrect indentation of the continuation line.

drivers/usb/host/ehci-fsl.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index e3d0c1c25160..38674b7aa51e 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -122,6 +122,12 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
tmp |= 0x4;
iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
}
+
+ /* Set USB_EN bit to select ULPI phy for USB controller version 2.5 */
+ if (pdata->controller_ver == FSL_USB_VER_2_5 &&
+ pdata->phy_mode == FSL_USB2_PHY_ULPI)
+ iowrite32be(USB_CTRL_USB_EN, hcd->regs + FSL_SOC_USB_CTRL);
+
/*
* Enable UTMI phy and program PTS field in UTMI mode before asserting
* controller reset for USB Controller version 2.5
--
2.17.1
\
 
 \ /
  Last update: 2019-06-24 09:22    [W:0.198 / U:6.380 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site