lkml.org 
[lkml]   [2019]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 11/22] iommu: Introduce guest PASID bind function
On Tue, 18 Jun 2019 16:36:33 +0100
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> wrote:

> On 09/06/2019 14:44, Jacob Pan wrote:
> > Guest shared virtual address (SVA) may require host to shadow guest
> > PASID tables. Guest PASID can also be allocated from the host via
> > enlightened interfaces. In this case, guest needs to bind the guest
> > mm, i.e. cr3 in guest physical address to the actual PASID table in
> > the host IOMMU. Nesting will be turned on such that guest virtual
> > address can go through a two level translation:
> > - 1st level translates GVA to GPA
> > - 2nd level translates GPA to HPA
> > This patch introduces APIs to bind guest PASID data to the assigned
> > device entry in the physical IOMMU. See the diagram below for usage
> > explaination.
>
> explanation
>
will fix, thanks
> >
> > .-------------. .---------------------------.
> > | vIOMMU | | Guest process mm, FL only |
> > | | '---------------------------'
> > .----------------/
> > | PASID Entry |--- PASID cache flush -
> > '-------------' |
> > | | V
> > | | GP
> > '-------------'
> > Guest
> > ------| Shadow |----------------------- GP->HP* ---------
> > v v |
> > Host v
> > .-------------. .----------------------.
> > | pIOMMU | | Bind FL for GVA-GPA |
> > | | '----------------------'
> > .----------------/ |
> > | PASID Entry | V (Nested xlate)
> > '----------------\.---------------------.
> > | | |Set SL to GPA-HPA |
> > | | '---------------------'
> > '-------------'
> >
> > Where:
> > - FL = First level/stage one page tables
> > - SL = Second level/stage two page tables
> > - GP = Guest PASID
> > - HP = Host PASID
> > * Conversion needed if non-identity GP-HP mapping option is chosen.
> >
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> > ---
> > drivers/iommu/iommu.c | 20 ++++++++++++++++
> > include/linux/iommu.h | 21 +++++++++++++++++
> > include/uapi/linux/iommu.h | 58
> > ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 99
> > insertions(+)
> >
> > diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> > index 1758b57..d0416f60 100644
> > --- a/drivers/iommu/iommu.c
> > +++ b/drivers/iommu/iommu.c
> > @@ -1648,6 +1648,26 @@ int iommu_cache_invalidate(struct
> > iommu_domain *domain, struct device *dev, }
> > EXPORT_SYMBOL_GPL(iommu_cache_invalidate);
> >
> > +int iommu_sva_bind_gpasid(struct iommu_domain *domain,
> > + struct device *dev, struct
> > gpasid_bind_data *data)
>
> I'm curious about the VFIO side of this. Is the ioctl on the device or
> on the container fd? For bind_pasid_table, it's on the container and
> we only pass the iommu_domain to the IOMMU driver, not the device
> (since devices in a domain share the same PASID table).
>
VFIO side of gpasid bind is on the container fd (Yi can confirm :)).
We have per device PASID table regardless of domain sharing. It can
provide more protection within the guest.
Second level page tables are harvested from domain for nested
translation.
> > +{
> > + if (unlikely(!domain->ops->sva_bind_gpasid))
> > + return -ENODEV;
> > +
> > + return domain->ops->sva_bind_gpasid(domain, dev, data);
> > +}
> > +EXPORT_SYMBOL_GPL(iommu_sva_bind_gpasid);
> > +
> > +int iommu_sva_unbind_gpasid(struct iommu_domain *domain, struct
> > device *dev,
> > + ioasid_t pasid)
> > +{
> > + if (unlikely(!domain->ops->sva_unbind_gpasid))
> > + return -ENODEV;
> > +
> > + return domain->ops->sva_unbind_gpasid(dev, pasid);
> > +}
> > +EXPORT_SYMBOL_GPL(iommu_sva_unbind_gpasid);
> > +
> > static void __iommu_detach_device(struct iommu_domain *domain,
> > struct device *dev)
> > {
> > diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> > index 8d766a8..560c8c8 100644
> > --- a/include/linux/iommu.h
> > +++ b/include/linux/iommu.h
> > @@ -25,6 +25,7 @@
> > #include <linux/errno.h>
> > #include <linux/err.h>
> > #include <linux/of.h>
> > +#include <linux/ioasid.h>
> > #include <uapi/linux/iommu.h>
> >
> > #define IOMMU_READ (1 << 0)
> > @@ -267,6 +268,8 @@ struct page_response_msg {
> > * @detach_pasid_table: detach the pasid table
> > * @cache_invalidate: invalidate translation caches
> > * @pgsize_bitmap: bitmap of all possible supported page sizes
> > + * @sva_bind_gpasid: bind guest pasid and mm
> > + * @sva_unbind_gpasid: unbind guest pasid and mm
> > */
> > struct iommu_ops {
> > bool (*capable)(enum iommu_cap);
> > @@ -332,6 +335,10 @@ struct iommu_ops {
> > int (*page_response)(struct device *dev, struct
> > page_response_msg *msg); int (*cache_invalidate)(struct
> > iommu_domain *domain, struct device *dev, struct
> > iommu_cache_invalidate_info *inv_info);
> > + int (*sva_bind_gpasid)(struct iommu_domain *domain,
> > + struct device *dev, struct
> > gpasid_bind_data *data); +
> > + int (*sva_unbind_gpasid)(struct device *dev, int pasid);
> >
> > unsigned long pgsize_bitmap;
> > };
> > @@ -447,6 +454,10 @@ extern void iommu_detach_pasid_table(struct
> > iommu_domain *domain); extern int iommu_cache_invalidate(struct
> > iommu_domain *domain, struct device *dev,
> > struct
> > iommu_cache_invalidate_info *inv_info); +extern int
> > iommu_sva_bind_gpasid(struct iommu_domain *domain,
> > + struct device *dev, struct gpasid_bind_data *data);
> > +extern int iommu_sva_unbind_gpasid(struct iommu_domain *domain,
> > + struct device *dev, ioasid_t
> > pasid); extern struct iommu_domain *iommu_get_domain_for_dev(struct
> > device *dev); extern struct iommu_domain
> > *iommu_get_dma_domain(struct device *dev); extern int
> > iommu_map(struct iommu_domain *domain, unsigned long iova, @@
> > -998,6 +1009,16 @@ iommu_cache_invalidate(struct iommu_domain
> > *domain, { return -ENODEV;
> > }
> > +static inline int iommu_sva_bind_gpasid(struct iommu_domain
> > *domain,
> > + struct device *dev, struct
> > gpasid_bind_data *data) +{
> > + return -ENODEV;
> > +}
> > +
> > +static inline int sva_unbind_gpasid(struct device *dev, int
> > pasid)
>
> The prototype above also has a domain argument
>
right, i missed the function name and argument.
> > +{
> > + return -ENODEV;
> > +}
> >
> > #endif /* CONFIG_IOMMU_API */
> >
> > diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
> > index ca4b753..a9cdc63 100644
> > --- a/include/uapi/linux/iommu.h
> > +++ b/include/uapi/linux/iommu.h
> > @@ -277,4 +277,62 @@ struct iommu_cache_invalidate_info {
> > };
> > };
> >
> > +/**
> > + * struct gpasid_bind_data_vtd - Intel VT-d specific data on
> > device and guest
> > + * SVA binding.
> > + *
> > + * @flags: VT-d PASID table entry attributes
> > + * @pat: Page attribute table data to compute effective
> > memory type
> > + * @emt: Extended memory type
> > + *
> > + * Only guest vIOMMU selectable and effective options are passed
> > down to
> > + * the host IOMMU.
> > + */
> > +struct gpasid_bind_data_vtd {
> > +#define IOMMU_SVA_VTD_GPASID_SRE (1 << 0) /* supervisor
> > request */ +#define IOMMU_SVA_VTD_GPASID_EAFE (1 << 1) /*
> > extended access enable */ +#define IOMMU_SVA_VTD_GPASID_PCD
> > (1 << 2) /* page-level cache disable */ +#define
> > IOMMU_SVA_VTD_GPASID_PWT (1 << 3) /* page-level write
> > through */ +#define IOMMU_SVA_VTD_GPASID_EMTE (1 << 4) /*
> > extended mem type enable */ +#define
> > IOMMU_SVA_VTD_GPASID_CD (1 << 5) /* PASID-level
> > cache disable */
> > + __u64 flags;
> > + __u32 pat;
> > + __u32 emt;
> > +};
> > +
> > +/**
> > + * struct gpasid_bind_data - Information about device and guest
> > PASID binding
> > + * @version: Version of this data structure
> > + * @format: PASID table entry format
> > + * @flags: Additional information on guest bind request
> > + * @gpgd: Guest page directory base of the guest mm to bind
> > + * @hpasid: Process address space ID used for the guest mm
> > in host IOMMU
> > + * @gpasid: Process address space ID used for the guest mm
> > in guest IOMMU
> > + * @addr_width: Guest virtual address width
>
> + "in bits"
>
yes, precisely.
> > + * @vtd: Intel VT-d specific data
> > + *
> > + * Guest to host PASID mapping can be an identity or non-identity,
> > where guest
> > + * has its own PASID space. For non-identify mapping, guest to
> > host PASID lookup
> > + * is needed when VM programs guest PASID into an assigned device.
> > VMM may
> > + * trap such PASID programming then request host IOMMU driver to
> > convert guest
> > + * PASID to host PASID based on this bind data.
> > + */
> > +struct gpasid_bind_data {
> > +#define IOMMU_GPASID_BIND_VERSION_1 1
> > + __u32 version;
> > +#define IOMMU_PASID_FORMAT_INTEL_VTD 1
> > + __u32 format;
> > +#define IOMMU_SVA_GPASID_VAL (1 << 0) /* guest PASID valid
> > */
> > + __u64 flags;
> > + __u64 gpgd;
> > + __u64 hpasid;
> > + __u64 gpasid;
> > + __u32 addr_width;
>
> We could use a __u8 for addr_width
>
true

> Thanks,
> Jean
>
> > + __u8 padding[4];
> > + /* Vendor specific data */
> > + union {
> > + struct gpasid_bind_data_vtd vtd;
> > + };
> > +};
> > +
> > #endif /* _UAPI_IOMMU_H */
> >
>

[Jacob Pan]

\
 
 \ /
  Last update: 2019-06-25 00:22    [W:0.170 / U:3.048 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site