lkml.org 
[lkml]   [2019]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] dmaengine: milbeaut-hdmac: Add HDMAC driver for Milbeaut platforms
On 12-06-19, 19:52, jassisinghbrar@gmail.com wrote:

> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_dma.h>

Do we need both, IIRC of_dma.h does include of.h!

> +/* mc->vc.lock must be held by caller */
> +static void milbeaut_chan_start(struct milbeaut_hdmac_chan *mc,
> + struct milbeaut_hdmac_desc *md)
> +{
> + struct scatterlist *sg;
> + u32 cb, ca, src_addr, dest_addr, len;
^^
double space

> +static irqreturn_t milbeaut_hdmac_interrupt(int irq, void *dev_id)
> +{
> + struct milbeaut_hdmac_chan *mc = dev_id;
> + struct milbeaut_hdmac_desc *md;
> + irqreturn_t ret = IRQ_HANDLED;
> + u32 val;
> +
> + spin_lock(&mc->vc.lock);
> +
> + /* Ack and Disable irqs */
> + val = readl_relaxed(mc->reg_ch_base + MLB_HDMAC_DMACB);
> + val &= ~(FIELD_PREP(MLB_HDMAC_SS, 0x7));
^^^^
Magic ..?

> +static int milbeaut_hdmac_chan_pause(struct dma_chan *chan)
> +{
> + struct virt_dma_chan *vc = to_virt_chan(chan);
> + struct milbeaut_hdmac_chan *mc = to_milbeaut_hdmac_chan(vc);
> + u32 val;
> +
> + spin_lock(&mc->vc.lock);
> + val = readl_relaxed(mc->reg_ch_base + MLB_HDMAC_DMACA);
> + val |= MLB_HDMAC_PB;
> + writel_relaxed(val, mc->reg_ch_base + MLB_HDMAC_DMACA);

We really should have an updatel() and friends in kernel, feel free to
add in your driver though!

> +static int milbeaut_hdmac_chan_init(struct platform_device *pdev,
> + struct milbeaut_hdmac_device *mdev,
> + int chan_id)
> +{
> + struct device *dev = &pdev->dev;
> + struct milbeaut_hdmac_chan *mc = &mdev->channels[chan_id];
> + char *irq_name;
> + int irq, ret;
> +
> + irq = platform_get_irq(pdev, chan_id);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ number for ch%d\n",
> + chan_id);
> + return irq;
> + }
> +
> + irq_name = devm_kasprintf(dev, GFP_KERNEL, "milbeaut-hdmac-%d",
> + chan_id);
> + if (!irq_name)
> + return -ENOMEM;
> +
> + ret = devm_request_irq(dev, irq, milbeaut_hdmac_interrupt,
> + IRQF_SHARED, irq_name, mc);

I tend to dislike using devm_request_irq(), we have no control over when
the irq is freed and what is a spirious irq is running while we are
unrolling, so IMHO it make sense to free up and ensure all tasklets are
quiesced when remove returns

> + if (ret)
> + return ret;
> +
> + mc->mdev = mdev;
> + mc->reg_ch_base = mdev->reg_base + MLB_HDMAC_CH_STRIDE * (chan_id + 1);
> + mc->vc.desc_free = milbeaut_hdmac_desc_free;
> + vchan_init(&mc->vc, &mdev->ddev);

who kills the vc->task?

> +static int milbeaut_hdmac_remove(struct platform_device *pdev)
> +{
> + struct milbeaut_hdmac_device *mdev = platform_get_drvdata(pdev);
> + struct dma_chan *chan;
> + int ret;
> +
> + /*
> + * Before reaching here, almost all descriptors have been freed by the
> + * ->device_free_chan_resources() hook. However, each channel might
> + * be still holding one descriptor that was on-flight at that moment.
> + * Terminate it to make sure this hardware is no longer running. Then,
> + * free the channel resources once again to avoid memory leak.
> + */
> + list_for_each_entry(chan, &mdev->ddev.channels, device_node) {
> + ret = dmaengine_terminate_sync(chan);
> + if (ret)
> + return ret;
> + milbeaut_hdmac_free_chan_resources(chan);
> + }
> +
> + of_dma_controller_free(pdev->dev.of_node);
> + dma_async_device_unregister(&mdev->ddev);
> + clk_disable_unprepare(mdev->clk);

And as suspected we have active tasklets and irq at this time :(
--
~Vinod

\
 
 \ /
  Last update: 2019-06-24 08:48    [W:0.165 / U:0.084 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site