lkml.org 
[lkml]   [2019]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 4/6] arm64: dts: fsl: ls1028a: Add Felix switch port DT node
On Mon, Jun 24, 2019 at 05:23:45PM +0200, Allan W. Nielsen wrote:
> Hi Andrew,
>
> The 06/24/2019 16:26, Andrew Lunn wrote:
> > > > Yeah, there are 2 ethernet controller ports (managed by the enetc driver)
> > > > connected inside the SoC via SGMII links to 2 of the switch ports, one of
> > > > these switch ports can be configured as CPU port (with follow-up patches).
> > > >
> > > > This configuration may look prettier on DSA, but the main restriction here
> > > > is that the entire functionality is provided by the ocelot driver which is a
> > > > switchdev driver. I don't think it would be a good idea to copy-paste code
> > > > from ocelot to a separate dsa driver.
> > > >
> > >
> > > We should probably make the ocelot driver a DSA driver then...
> > An important part of DSA is being able to direct frames out specific
> > ports when they ingress via the CPU port. Does the silicon support
> > this? At the moment, i think it is using polled IO.
>
> That is supported, it requires a bit of initial configuration of the Chip, but
> nothing big (I believe this configuration is part of Claudiu's change-set).
>
> But how do you envision this done?
>
> - Let the existing SwitchDev driver and the DSA driver use a set of common
> functions.
> - Convert the existing Ocelot driver from SwitchDev to DSA
> - Fork (copy) the existing driver of Ocelot, and modify it as needed for the
> Felix driver
>
> My guess is the first one, but I would like to understand what you have in mind.

I don't know the various architectures the switch is used in. But it
does seem like a core library, and then a switchdev wrapper for Ocelot
and a DSA wrapper for Felix would make sense.

Andrew

\
 
 \ /
  Last update: 2019-06-24 18:25    [W:0.065 / U:4.744 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site