[lkml]   [2019]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net-next 4/6] arm64: dts: fsl: ls1028a: Add Felix switch port DT node
Hi Andrew,

The 06/24/2019 16:26, Andrew Lunn wrote:
> > > Yeah, there are 2 ethernet controller ports (managed by the enetc driver)
> > > connected inside the SoC via SGMII links to 2 of the switch ports, one of
> > > these switch ports can be configured as CPU port (with follow-up patches).
> > >
> > > This configuration may look prettier on DSA, but the main restriction here
> > > is that the entire functionality is provided by the ocelot driver which is a
> > > switchdev driver. I don't think it would be a good idea to copy-paste code
> > > from ocelot to a separate dsa driver.
> > >
> >
> > We should probably make the ocelot driver a DSA driver then...
> An important part of DSA is being able to direct frames out specific
> ports when they ingress via the CPU port. Does the silicon support
> this? At the moment, i think it is using polled IO.

That is supported, it requires a bit of initial configuration of the Chip, but
nothing big (I believe this configuration is part of Claudiu's change-set).

But how do you envision this done?

- Let the existing SwitchDev driver and the DSA driver use a set of common
- Convert the existing Ocelot driver from SwitchDev to DSA
- Fork (copy) the existing driver of Ocelot, and modify it as needed for the
Felix driver

My guess is the first one, but I would like to understand what you have in mind.

BTW: The Ocelot switch does exist in an other (register compatible) version
without the MIPS CPU. That version would use a MAC-2-MAC connection to an
external CPU, and would fit the DSA model. And we have been considering how to
best represent that version in the kernel.


 \ /
  Last update: 2019-06-24 17:24    [W:0.055 / U:36.664 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site