lkml.org 
[lkml]   [2019]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
Date
When the system is overloaded, DMA data transfer completion occurs after
100ms. Increase the timeouts to let it the time to complete.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
---
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 4aabea2..c7f7c6f 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -981,7 +981,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,

/* Wait DMA data transfer completion */
if (!wait_for_completion_timeout(&fmc2->dma_data_complete,
- msecs_to_jiffies(100))) {
+ msecs_to_jiffies(500))) {
dev_err(fmc2->dev, "data DMA timeout\n");
dmaengine_terminate_all(dma_ch);
ret = -ETIMEDOUT;
@@ -990,7 +990,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
/* Wait DMA ECC transfer completion */
if (!write_data && !raw) {
if (!wait_for_completion_timeout(&fmc2->dma_ecc_complete,
- msecs_to_jiffies(100))) {
+ msecs_to_jiffies(500))) {
dev_err(fmc2->dev, "ECC DMA timeout\n");
dmaengine_terminate_all(fmc2->dma_ecc_ch);
ret = -ETIMEDOUT;
--
1.9.1
\
 
 \ /
  Last update: 2019-06-21 16:48    [W:0.036 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site