lkml.org 
[lkml]   [2019]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] mt76: mt7615: enable support for mesh
From
Date
On Fri, 2019-05-31 at 22:09 +0800, Ryder Lee wrote:
> Enable NL80211_IFTYPE_MESH_POINT and update its path.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> Changes since v2 - remove unused definitions
> ---
> drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
> drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
> drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 5 ++++-
> drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 6 ------
> 4 files changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
> index 59f604f3161f..f860af6a42da 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
> @@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = {
> {
> .max = MT7615_MAX_INTERFACES,
> .types = BIT(NL80211_IFTYPE_AP) |
> +#ifdef CONFIG_MAC80211_MESH
> + BIT(NL80211_IFTYPE_MESH_POINT) |
> +#endif
> BIT(NL80211_IFTYPE_STATION)
> }
> };
> @@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev)
> dev->mt76.antenna_mask = 0xf;
>
> wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
> +#ifdef CONFIG_MAC80211_MESH
> + BIT(NL80211_IFTYPE_MESH_POINT) |
> +#endif
> BIT(NL80211_IFTYPE_AP);
>
> ret = mt76_register_device(&dev->mt76, true, mt7615_rates,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> index b0bb7cc12385..585e67fa2728 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask)
>
> switch (type) {
> case NL80211_IFTYPE_AP:
> + case NL80211_IFTYPE_MESH_POINT:
> /* ap use hw bssid 0 and ext bssid */
> if (~mask & BIT(HW_BSSID_0))
> return HW_BSSID_0;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> index 43f70195244c..8b8db526cb16 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev,
>
> switch (vif->type) {
> case NL80211_IFTYPE_AP:
> + case NL80211_IFTYPE_MESH_POINT:
> tx_wlan_idx = mvif->sta.wcid.idx;
> conn_type = CONNECTION_INFRA_AP;
> break;
> @@ -968,7 +969,8 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> .rx_wtbl = {
> .tag = cpu_to_le16(WTBL_RX),
> .len = cpu_to_le16(sizeof(struct wtbl_rx)),
> - .rca1 = vif->type != NL80211_IFTYPE_AP,
> + .rca1 = vif->type != (NL80211_IFTYPE_AP ||
> + NL80211_IFTYPE_MESH_POINT),

Oops, this expression is wrong. I will fix it in v3.
Sorry for the inconvenience.

Ryder

\
 
 \ /
  Last update: 2019-06-02 16:37    [W:0.039 / U:1.492 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site