lkml.org 
[lkml]   [2019]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] drm/nouveau/bios/init: handle INIT_RESET_END devinit opcode
Date
Signal that the reset sequence has completed.

This opcode signals that the software reset sequence has completed.
Ordinarily, no actual operations are performed by the opcode.
However it allows for possible software work arounds by devinit
engines in software agents other than the VBIOS, such as the resman,
FCODE, and EFI driver.

Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
---
drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c
index a54b5e410dcd..49d09503cd31 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c
@@ -1945,6 +1945,17 @@ init_reset_begun(struct nvbios_init *init)
init->offset += 1;
}

+/**
+ * INIT_RESET_END - opcode 0x8d
+ *
+ */
+static void
+init_reset_end(struct nvbios_init *init)
+{
+ trace("RESET_END\n");
+ init->offset += 1;
+}
+
/**
* INIT_GPIO - opcode 0x8e
*
@@ -2272,7 +2283,7 @@ static struct nvbios_init_opcode {
[0x7a] = { init_zm_reg },
[0x87] = { init_ram_restrict_pll },
[0x8c] = { init_reset_begun },
- [0x8d] = { init_reserved },
+ [0x8d] = { init_reset_end },
[0x8e] = { init_gpio },
[0x8f] = { init_ram_restrict_zm_reg_group },
[0x90] = { init_copy_zm_reg },
--
2.20.1
\
 
 \ /
  Last update: 2019-06-02 16:14    [W:0.047 / U:6.740 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site