lkml.org 
[lkml]   [2019]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] perf cs-etm: Improve completeness for kernel address space
Hi Mathieu,

On Wed, Jun 19, 2019 at 11:49:44AM -0600, Mathieu Poirier wrote:

[...]

> > diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
> > index 51dd00f65709..4776c2c1fb6d 100644
> > --- a/tools/perf/Makefile.config
> > +++ b/tools/perf/Makefile.config
> > @@ -418,6 +418,30 @@ ifdef CORESIGHT
> > endif
> > LDFLAGS += $(LIBOPENCSD_LDFLAGS)
> > EXTLIBS += $(OPENCSDLIBS)
> > + ifneq ($(wildcard $(srctree)/arch/arm64/kernel/vmlinux.lds),)
> > + # Extract info from lds:
> > + # . = ((((((((0xffffffffffffffff)) - (((1)) << (48)) + 1) + (0)) + (0x08000000))) + (0x08000000))) + 0x00080000;
> > + # ARM64_PRE_START_SIZE := (0x08000000 + 0x08000000 + 0x00080000)
> > + ARM64_PRE_START_SIZE := $(shell egrep ' \. \= \({8}0x[0-9a-fA-F]+\){2}' \
> > + $(srctree)/arch/arm64/kernel/vmlinux.lds | \
> > + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> > + awk -F' ' '{print "("$$6 "+" $$7 "+" $$8")"}' 2>/dev/null)
> > + else
> > + ARM64_PRE_START_SIZE := 0
> > + endif
> > + CFLAGS += -DARM64_PRE_START_SIZE="$(ARM64_PRE_START_SIZE)"
> > + ifneq ($(wildcard $(srctree)/arch/arm/kernel/vmlinux.lds),)
> > + # Extract info from lds:
> > + # . = ((0xC0000000)) + 0x00208000;
> > + # ARM_PRE_START_SIZE := 0x00208000
> > + ARM_PRE_START_SIZE := $(shell egrep ' \. \= \({2}0x[0-9a-fA-F]+\){2}' \
> > + $(srctree)/arch/arm/kernel/vmlinux.lds | \
> > + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> > + awk -F' ' '{print "("$$2")"}' 2>/dev/null)
> > + else
> > + ARM_PRE_START_SIZE := 0
> > + endif
> > + CFLAGS += -DARM_PRE_START_SIZE="$(ARM_PRE_START_SIZE)"
> > $(call detected,CONFIG_LIBOPENCSD)
> > ifdef CSTRACE_RAW
> > CFLAGS += -DCS_DEBUG_RAW
> > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
> > index 0c7776b51045..ae831f836c70 100644
> > --- a/tools/perf/util/cs-etm.c
> > +++ b/tools/perf/util/cs-etm.c
> > @@ -613,10 +613,34 @@ static void cs_etm__free(struct perf_session *session)
> > static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
> > {
> > struct machine *machine;
> > + u64 fixup_kernel_start = 0;
> > + const char *arch;
> >
> > machine = etmq->etm->machine;
> > + arch = perf_env__arch(machine->env);
> >
> > - if (address >= etmq->etm->kernel_start) {
> > + /*
> > + * Since arm and arm64 specify some memory regions prior to
> > + * 'kernel_start', kernel addresses can be less than 'kernel_start'.
> > + *
> > + * For arm architecture, the 16MB virtual memory space prior to
> > + * 'kernel_start' is allocated to device modules, a PMD table if
> > + * CONFIG_HIGHMEM is enabled and a PGD table.
> > + *
> > + * For arm64 architecture, the root PGD table, device module memory
> > + * region and BPF jit region are prior to 'kernel_start'.
> > + *
> > + * To reflect the complete kernel address space, compensate these
> > + * pre-defined regions for kernel start address.
> > + */
> > + if (!strcmp(arch, "arm64"))
> > + fixup_kernel_start = etmq->etm->kernel_start -
> > + ARM64_PRE_START_SIZE;
> > + else if (!strcmp(arch, "arm"))
> > + fixup_kernel_start = etmq->etm->kernel_start -
> > + ARM_PRE_START_SIZE;
>
> I will test your work but from a quick look wouldn't it be better to
> have a single define name here? From looking at the modifications you
> did to Makefile.config there doesn't seem to be a reason to have two.

Thanks for suggestion. I changed to use single define
ARM_PRE_START_SIZE and sent patch v2 [1].

If possible, please test patch v2.

Thanks,
Leo Yan

[1] https://lore.kernel.org/linux-arm-kernel/20190620005428.20883-1-leo.yan@linaro.org/T/#u

> > +
> > + if (address >= fixup_kernel_start) {
> > if (machine__is_host(machine))
> > return PERF_RECORD_MISC_KERNEL;
> > else
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2019-06-20 02:59    [W:0.103 / U:27.428 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site