lkml.org 
[lkml]   [2019]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5 v3] drm/msm/mdp5: Use the interconnect API
Date
From: Georgi Djakov <georgi.djakov@linaro.org>

The interconnect API provides an interface for consumer drivers to
express their bandwidth needs in the SoC. This data is aggregated
and the on-chip interconnect hardware is configured to the most
appropriate power/performance profile.

Use the API to configure the interconnects and request bandwidth
between DDR and the display hardware (MDP port(s) and rotator
downscaler).

v2: update the path names to be consistent with dpu, handle the NULL
path case, updated commit msg from Georgi.
v3: split out icc setup into it's own function, and rework logic
slightly so no interconnect paths is not fatal.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
---
drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 38 ++++++++++++++++++++++++
1 file changed, 38 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
index 97179bec8902..1c55401956c4 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
@@ -16,6 +16,7 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/

+#include <linux/interconnect.h>
#include <linux/of_irq.h>

#include "msm_drv.h"
@@ -1048,9 +1049,46 @@ static const struct component_ops mdp5_ops = {
.unbind = mdp5_unbind,
};

+static int mdp5_setup_interconnect(struct platform_device *pdev)
+{
+ struct icc_path *path0 = of_icc_get(&pdev->dev, "mdp0-mem");
+ struct icc_path *path1 = of_icc_get(&pdev->dev, "mdp1-mem");
+ struct icc_path *path_rot = of_icc_get(&pdev->dev, "rotator-mem");
+
+ if (IS_ERR(path0))
+ return PTR_ERR(path0);
+
+ if (!path0) {
+ /* no interconnect support is not necessarily a fatal
+ * condition, the platform may simply not have an
+ * interconnect driver yet. But warn about it in case
+ * bootloader didn't setup bus clocks high enough for
+ * scanout.
+ */
+ dev_warn(&pdev->dev, "No interconnect support may cause display underflows!\n");
+ return 0;
+ }
+
+ icc_set_bw(path0, 0, MBps_to_icc(6400));
+
+ if (!IS_ERR_OR_NULL(path1))
+ icc_set_bw(path1, 0, MBps_to_icc(6400));
+ if (!IS_ERR_OR_NULL(path_rot))
+ icc_set_bw(path_rot, 0, MBps_to_icc(6400));
+
+ return 0;
+}
+
static int mdp5_dev_probe(struct platform_device *pdev)
{
+ int ret;
+
DBG("");
+
+ ret = mdp5_setup_interconnect(pdev);
+ if (ret)
+ return ret;
+
return component_add(&pdev->dev, &mdp5_ops);
}

--
2.20.1
\
 
 \ /
  Last update: 2019-06-19 00:12    [W:0.327 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site