lkml.org 
[lkml]   [2019]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/9] Multicolor Framework update
From
Date
Hello

On 6/16/19 10:49 AM, Pavel Machek wrote:
> Hi!
>
>> Am Donnerstag, 23. Mai 2019, 14:08:11 CEST schrieb Dan Murphy:
>>> leds: multicolor: Add sysfs interface definition
>>> dt: bindings: Add multicolor class dt bindings documention
>>> documention: leds: Add multicolor class documentation
>>> dt-bindings: leds: Add multicolor ID to the color ID list
>>> leds: Add multicolor ID to the color ID list
>>> leds: multicolor: Introduce a multicolor class definition
>>> dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
>>> leds: lp50xx: Add the LP50XX family of the RGB LED driver
>>> leds: Update the lp55xx to use the multi color framework
>> While not having much experience with the implementation of the LED subsystem,
>> I've had a short look at those. Curious question: would it be possible to take
>> three gpio-leds and group those together to one multicolor-led? I know at
>> least one board, where things are wired up like this, see e.g.
>> at91-sama5d27_som1_ek.dts
> Probably could be done, but is not really a good match. Multicolor was meant for
> LEDs with many brightness levels.

Well that is one aspect of the MC FW.  The other aspect was to collate
cluster RGB modules into a single

LED node as that RGB cluster would inherently display a functional color
(ie RGB battery LED, multi-color

notification LEDs, Multicolor LED keyboards...)

Dan


> Pavel

\
 
 \ /
  Last update: 2019-06-17 15:48    [W:1.977 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site