lkml.org 
[lkml]   [2019]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v2 5/9] drm/sun4i: tcon_top: Register clock gates in probe
On Sun, Jun 16, 2019 at 11:01 AM Chen-Yu Tsai <wens@csie.org> wrote:
>
> On Sat, Jun 15, 2019 at 12:44 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > TCON TOP have clock gates for TV0, TV1, dsi and right
> > now these are register during bind call.
> >
> > Of which, dsi clock gate would required during DPHY probe
> > but same can miss to get since tcon top is not bound at
> > that time.
> >
> > To solve, this circular dependency move the clock gate
> > registration from bind to probe so-that DPHY can get the
> > dsi gate clock on time.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 94 ++++++++++++++------------
> > 1 file changed, 49 insertions(+), 45 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> > index 465e9b0cdfee..a8978b3fe851 100644
> > --- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> > +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> > @@ -124,7 +124,53 @@ static struct clk_hw *sun8i_tcon_top_register_gate(struct device *dev,
> > static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
> > void *data)
> > {
> > - struct platform_device *pdev = to_platform_device(dev);
> > + struct sun8i_tcon_top *tcon_top = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + ret = reset_control_deassert(tcon_top->rst);
> > + if (ret) {
> > + dev_err(dev, "Could not deassert ctrl reset control\n");
> > + return ret;
> > + }
> > +
> > + ret = clk_prepare_enable(tcon_top->bus);
> > + if (ret) {
> > + dev_err(dev, "Could not enable bus clock\n");
> > + goto err_assert_reset;
> > + }
>
> You have to de-assert the reset control and enable the clock before the
> clocks it provides are registered. Otherwise a consumer may come in and
> ask for the provided clock to be enabled, but since the TCON TOP's own
> reset and clock are still disabled, you can't actually access the registers
> that controls the provided clock.

These rst and bus are common reset and bus clocks not tcon top clocks
that are trying to register here. ie reason I have not moved it in
top.

\
 
 \ /
  Last update: 2019-06-17 12:30    [W:0.113 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site