lkml.org 
[lkml]   [2019]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v1 3/5] net: stmmac: drop the reset GPIO from struct stmmac_mdio_bus_data
Date
No platform uses the "reset_gpio" field from stmmac_mdio_bus_data
anymore. Drop it so we don't get any new consumers either.

Plain GPIO numbers are being deprecated in favor of GPIO descriptors. If
needed any new non-OF platform can add a GPIO descriptor lookup table.
devm_gpiod_get_optional() will find the GPIO in that case.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 29 ++++++-------------
include/linux/stmmac.h | 1 -
2 files changed, 9 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 4614f1f2bffb..459ef8afe4fb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -253,21 +253,15 @@ int stmmac_mdio_reset(struct mii_bus *bus)
if (priv->device->of_node) {
struct gpio_desc *reset_gpio;

- if (data->reset_gpio < 0) {
- reset_gpio = devm_gpiod_get_optional(priv->device,
- "snps,reset",
- GPIOD_OUT_LOW);
- if (IS_ERR(reset_gpio))
- return PTR_ERR(reset_gpio);
-
- device_property_read_u32_array(priv->device,
- "snps,reset-delays-us",
- data->delays, 3);
- } else {
- reset_gpio = gpio_to_desc(data->reset_gpio);
-
- gpiod_direction_output(reset_gpio, 0);
- }
+ reset_gpio = devm_gpiod_get_optional(priv->device,
+ "snps,reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(reset_gpio))
+ return PTR_ERR(reset_gpio);
+
+ device_property_read_u32_array(priv->device,
+ "snps,reset-delays-us",
+ data->delays, 3);

if (data->delays[0])
msleep(DIV_ROUND_UP(data->delays[0], 1000));
@@ -323,11 +317,6 @@ int stmmac_mdio_register(struct net_device *ndev)
if (mdio_bus_data->irqs)
memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq));

-#ifdef CONFIG_OF
- if (priv->device->of_node)
- mdio_bus_data->reset_gpio = -1;
-#endif
-
new_bus->name = "stmmac";

if (priv->plat->has_xgmac) {
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 816edb545592..fe865df82e48 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -97,7 +97,6 @@ struct stmmac_mdio_bus_data {
int *irqs;
int probed_phy_irq;
#ifdef CONFIG_OF
- int reset_gpio;
u32 delays[3];
#endif
};
--
2.22.0
\
 
 \ /
  Last update: 2019-06-15 12:10    [W:0.062 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site