lkml.org 
[lkml]   [2019]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH v2 04/11] dt-bindings: opp: Introduce opp-peak-KBps and opp-avg-KBps bindings
From
Interconnects often quantify their performance points in terms of
bandwidth. So, add opp-peak-KBps (required) and opp-avg-KBps (optional) to
allow specifying Bandwidth OPP tables in DT.

opp-peak-KBps is a required property that replace opp-hz for Bandwidth OPP
tables.

opp-avg-KBps is an optional property that can be used in Bandwidth OPP
tables.

Signed-off-by: Saravana Kannan <saravanak@google.com>
---
Documentation/devicetree/bindings/opp/opp.txt | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 76b6c79604a5..c869e87caa2a 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -83,9 +83,14 @@ properties.

Required properties:
- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
- required property for all device nodes but devices like power domains. The
- power domain nodes must have another (implementation dependent) property which
- uniquely identifies the OPP nodes.
+ required property for all device nodes but for devices like power domains or
+ bandwidth opp tables. The power domain nodes must have another (implementation
+ dependent) property which uniquely identifies the OPP nodes. The interconnect
+ opps are required to have the opp-peak-bw property.
+
+- opp-peak-KBps: Peak bandwidth in kilobytes per second, expressed as a 32-bit
+ big-endian integer. This is a required property for all devices that don't
+ have opp-hz. For example, bandwidth OPP tables for interconnect paths.

Optional properties:
- opp-microvolt: voltage in micro Volts.
@@ -132,6 +137,10 @@ Optional properties:
- opp-level: A value representing the performance level of the device,
expressed as a 32-bit integer.

+- opp-avg-KBps: Average bandwidth in kilobytes per second, expressed as a
+ 32-bit big-endian integer. This property is only meaningful in OPP tables
+ where opp-peak-KBps is present.
+
- clock-latency-ns: Specifies the maximum possible transition latency (in
nanoseconds) for switching to this OPP from any other OPP.

--
2.22.0.rc2.383.gf4fbbf30c2-goog
\
 
 \ /
  Last update: 2019-06-14 06:19    [W:0.071 / U:32.544 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site