lkml.org 
[lkml]   [2019]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/2] media: v4l: xilinx: Add Xilinx UHD-SDI Rx Subsystem driver
Date
Hi Joe,

Thanks for reviewing.

> -----Original Message-----
> From: linux-media-owner@vger.kernel.org [mailto:linux-media-
> owner@vger.kernel.org] On Behalf Of Joe Perches
> Sent: Friday, June 14, 2019 4:02 AM
> To: Hyun Kwon <hyunk@xilinx.com>; Vishal Sagar <vishal.sagar@xilinx.com>
> Cc: Hyun Kwon <hyunk@xilinx.com>; Laurent Pinchart
> <laurent.pinchart@ideasonboard.com>; Mauro Carvalho Chehab
> <mchehab@kernel.org>; Michal Simek <michals@xilinx.com>; Rob Herring
> <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; linux-
> kernel@vger.kernel.org; linux-media@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; devicetree@vger.kernel.org; Dinesh Kumar
> <dineshk@xilinx.com>; Sandip Kothari <sandipk@xilinx.com>
> Subject: Re: [PATCH 2/2] media: v4l: xilinx: Add Xilinx UHD-SDI Rx Subsystem
> driver
>
> EXTERNAL EMAIL
>
> On Thu, 2019-06-13 at 15:05 -0700, Hyun Kwon wrote:
> > On Tue, 2019-06-04 at 06:55:56 -0700, Vishal Sagar wrote:
>
> trivia:
>
> > > diff --git a/drivers/media/platform/xilinx/xilinx-sdirxss.c
> b/drivers/media/platform/xilinx/xilinx-sdirxss.c
> []
> > > +static int xsdirx_get_stream_properties(struct xsdirxss_state *state)
> > > +{
> []
> > > + if (valid & XSDIRX_ST352_VALID_DS1_MASK) {
> > > + payload = xsdirxss_read(core, XSDIRX_ST352_DS1_REG);
> > > + byte1 = (payload >> XST352_PAYLOAD_BYTE1_SHIFT) &
> > > + XST352_PAYLOAD_BYTE_MASK;
>
> Is XST352_PAYLOAD_BYTE_MASK correct ?
> Should it be XST352_PAYLOAD_BYTE1_MASK ?
>

I had thought of it to be a generic mask to extract a byte out of 4 bytes in a ST352 packet.
Hence named it as XST352_PAYLOAD_BYTE_MASK

> > > + active_luma = (payload &
> XST352_BYTE3_ACT_LUMA_COUNT_MASK) >>
> > > + XST352_BYTE3_ACT_LUMA_COUNT_OFFSET;
> > > + pic_type = (payload & XST352_BYTE2_PIC_TYPE_MASK) >>
> > > + XST352_BYTE2_PIC_TYPE_OFFSET;
> > > + framerate = (payload >> XST352_BYTE2_FPS_SHIFT) &
> > > + XST352_BYTE2_FPS_MASK;
> > > + tscan = (payload & XST352_BYTE2_TS_TYPE_MASK) >>
> > > + XST352_BYTE2_TS_TYPE_OFFSET;
> >
> > Please align consistently throughout the patch. I believe the checkpatch
> > --strict warns on these.
>
> I believe not.
>
> Another possibility would be to use a macro like:
>
> #define mask_and_shift(val, type) \
> ((val) & (XST352_ ## type ## _MASK)) >> (XST352_ ## type ## _OFFSET))
>
> > > + sampling = (payload & XST352_BYTE3_COLOR_FORMAT_MASK) >>
> > > + XST352_BYTE3_COLOR_FORMAT_OFFSET;
>
> So these could be something like:
>
> sampling = mask_and_shift(payload, BYTE3_COLOR_FORMAT);
>

This looks like a good way. I will modify this in v2.
I will also modify the XST352_PAYLOAD_BYTE_MASK to
XST352_PAYLOAD_BYTE1_MASK so that this aligns with the macro.

Regards
Vishal Sagar

\
 
 \ /
  Last update: 2019-06-14 14:17    [W:0.097 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site