lkml.org 
[lkml]   [2019]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 20/20] drm: rcar-du: kms: Update CMM in atomic commit tail
Hi Laurent,

On Fri, Jun 07, 2019 at 03:06:33PM +0300, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Thu, Jun 06, 2019 at 04:22:20PM +0200, Jacopo Mondi wrote:
> > Update CMM settings at in the atomic commit tail helper method.
> >
> > The CMM is updated with new gamma values provided to the driver
> > in the GAMMA_LUT blob property.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> > drivers/gpu/drm/rcar-du/rcar_du_kms.c | 36 +++++++++++++++++++++++++++
> > 1 file changed, 36 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> > index 5a910a04e1d9..29a2020a46b5 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> > @@ -21,6 +21,7 @@
> > #include <linux/of_platform.h>
> > #include <linux/wait.h>
> >
> > +#include "rcar_cmm.h"
> > #include "rcar_du_crtc.h"
> > #include "rcar_du_drv.h"
> > #include "rcar_du_encoder.h"
> > @@ -367,6 +368,38 @@ rcar_du_fb_create(struct drm_device *dev, struct drm_file *file_priv,
> > * Atomic Check and Update
> > */
> >
> > +static void rcar_du_atomic_commit_update_cmm(struct drm_crtc *crtc,
> > + struct drm_crtc_state *old_state)
> > +{
> > + struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> > + struct rcar_cmm_config cmm_config = {};
> > +
> > + if (!rcrtc->cmm || !crtc->state->color_mgmt_changed)
> > + return;
> > +
> > + if (!crtc->state->gamma_lut) {
> > + cmm_config.lut.enable = false;
> > + rcar_cmm_setup(rcrtc->cmm, &cmm_config);
> > +
> > + return;
> > + }
> > +
> > + cmm_config.lut.enable = true;
> > + cmm_config.lut.table = (struct drm_color_lut *)
> > + crtc->state->gamma_lut->data;
> > +
> > + /* Set LUT table size to 0 if entries should not be updated. */
> > + if (!old_state->gamma_lut ||
> > + (old_state->gamma_lut->base.id !=
> > + crtc->state->gamma_lut->base.id))
> > + cmm_config.lut.size = crtc->state->gamma_lut->length
> > + / sizeof(cmm_config.lut.table[0]);
>
> Do you need to call rcar_cmm_setup() at all in this case ?
>

Do you mean in case the lut.size field is set to 0 ?
I considered it useful when the CMM has to be re-enabled without
updateing the LUT table entries? It is not required in your opinion?

Thanks
j

> > + else
> > + cmm_config.lut.size = 0;
> > +
> > + rcar_cmm_setup(rcrtc->cmm, &cmm_config);
> > +}
> > +
> > static int rcar_du_atomic_check(struct drm_device *dev,
> > struct drm_atomic_state *state)
> > {
> > @@ -409,6 +442,9 @@ static void rcar_du_atomic_commit_tail(struct drm_atomic_state *old_state)
> > rcdu->dpad1_source = rcrtc->index;
> > }
> >
> > + for_each_old_crtc_in_state(old_state, crtc, crtc_state, i)
> > + rcar_du_atomic_commit_update_cmm(crtc, crtc_state);
> > +
> > /* Apply the atomic update. */
> > drm_atomic_helper_commit_modeset_disables(dev, old_state);
> > drm_atomic_helper_commit_planes(dev, old_state,
>
> --
> Regards,
>
> Laurent Pinchart
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-06-14 10:19    [W:0.117 / U:13.912 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site