Messages in this thread | | | From | daniel.baluta@nxp ... | Subject | [PATCH 0/2] Add support for DSP IPC protocol driver | Date | Fri, 14 Jun 2019 16:16:48 +0800 |
| |
From: Daniel Baluta <daniel.baluta@nxp.com>
Hifi4 DSP can be found on some i.MX8 platforms (e.g i.MX8QXP, i.MX8QM). This patch series introduces the layer that allows Host CPU to communicate with DSP.
This layer provides a doorbell and clients can used that to notify DSP that a message is placed somewhere in the shared memory.
The protocol used is request - reply. Usually, Host/DSP write a message in a shared memory area and notify the other side. The other side will also write a reply in a designated shared memory area and then ring the doorbell to let the counterpart that a message is ready.
Daniel Baluta (2): firmware: imx: Add DSP IPC protocol driver dt-bindings: arm: fsl: Add DSP IPC binding support
.../bindings/arm/freescale/fsl,dsp.yaml | 43 +++++ drivers/firmware/imx/Kconfig | 11 ++ drivers/firmware/imx/Makefile | 1 + drivers/firmware/imx/imx-dsp.c | 167 ++++++++++++++++++ include/linux/firmware/imx/dsp.h | 61 +++++++ 5 files changed, 283 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,dsp.yaml create mode 100644 drivers/firmware/imx/imx-dsp.c create mode 100644 include/linux/firmware/imx/dsp.h
-- 2.17.1
| |