lkml.org 
[lkml]   [2019]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/3] platform/chrome: cros_ec_lpc: Choose Microchip EC at runtime
Date
On many boards, communication between the kernel and the Embedded
Controller happens over an LPC bus. In these cases, the kernel config
CONFIG_CROS_EC_LPC is enabled. Some of these LPC boards contain a
Microchip Embedded Controller (MEC) that is different from the regular
EC. On these devices, the same LPC bus is used, but the protocol is
a little different. In these cases, the CONFIG_CROS_EC_LPC_MEC kernel
config is enabled. Currently, the kernel decides at compile-time whether
or not to use the MEC variant, and, when that kernel option is selected
it breaks the other boards. We would like a kind of runtime detection to
avoid this.

This patch adds that detection mechanism by probing the protocol at
runtime, first we assume that a MEC variant is connected, and if the
protocol fails it fallbacks to the regular EC. This adds a bit of
overload because we try to read twice on those LPC boards that doesn't
contain a MEC variant, but is a better solution than having to select the
EC variant at compile-time.

While here also fix the alignment in Kconfig file for this config option
replacing the spaces by tabs.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Nick Crews <ncrews@chromium.org>
---
Hi,

This is another attempt to solve the issue to be able to select at
runtime the CrOS MEC variant. My first thought was check for a device
ID, the MEC1322 has a register that contains the device ID, however I
am not sure if we can read that register from the host without
modifying the firmware. Also, I am not sure if the MEC1322 is the only
device used that supports that LPC protocol variant, so I ended with a
more easy solution, check if the protocol fails or not. Some background
on this issue can be found [1] and [2]

The patch has been tested on:
- Acer Chromebook R11 (Cyan - MEC variant)
- Pixel Chromebook 2015 (Samus - non-MEC variant)
- Dell Chromebook 11 (Wolf - non-MEC variant)
- Toshiba Chromebook (Leon - non-MEC variant)

Best regards,
Enric

[1] https://bugs.chromium.org/p/chromium/issues/detail?id=932626
[2] https://chromium-review.googlesource.com/c/chromiumos/overlays/chromiumos-overlay/+/1474254

Changes in v5:
- Assign the methods in cros_ec_lpc_probe(), so down there
you can see explicitly what the defaults are

Changes in v4:
- Change the logic to test the protocols as suggested by Nick Crews.
- Add the proper cros_ec_lpc_mec.h include. (Nick Crews)
- Fix some const and missing casts. (Nick Crews)
- Clean up related doc-strings. (Nick Crews)

Changes in v3:
- Kconfig: Split across multiple lines to keep it under 80 characters.
- Improve kernel-doc as suggested by Nick Crews.
- Convert msg in write function to const.
- Add rb and tb tags.

Changes in v2:
- Remove global bool to indicate the kind of variant as suggested by Ezequiel.
- Create an internal operations struct to allow different variants.

drivers/platform/chrome/Kconfig | 29 ++---
drivers/platform/chrome/Makefile | 2 +-
drivers/platform/chrome/cros_ec_lpc.c | 158 ++++++++++++-----------
drivers/platform/chrome/wilco_ec/Kconfig | 2 +-
4 files changed, 95 insertions(+), 96 deletions(-)

diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 2826f7136f65..453e69733842 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -83,28 +83,17 @@ config CROS_EC_SPI
'pre-amble' bytes before the response actually starts.

config CROS_EC_LPC
- tristate "ChromeOS Embedded Controller (LPC)"
- depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
- help
- If you say Y here, you get support for talking to the ChromeOS EC
- over an LPC bus. This uses a simple byte-level protocol with a
- checksum. This is used for userspace access only. The kernel
- typically has its own communication methods.
-
- To compile this driver as a module, choose M here: the
- module will be called cros_ec_lpc.
-
-config CROS_EC_LPC_MEC
- bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant"
- depends on CROS_EC_LPC
- default n
+ tristate "ChromeOS Embedded Controller (LPC)"
+ depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
help
- If you say Y here, a variant LPC protocol for the Microchip EC
- will be used. Note that this variant is not backward compatible
- with non-Microchip ECs.
+ If you say Y here, you get support for talking to the ChromeOS EC
+ over an LPC bus, including the LPC Microchip EC (MEC) variant.
+ This uses a simple byte-level protocol with a checksum. This is
+ used for userspace access only. The kernel typically has its own
+ communication methods.

- If you have a ChromeOS Embedded Controller Microchip EC variant
- choose Y here.
+ To compile this driver as a module, choose M here: the
+ module will be called cros_ec_lpcs.

config CROS_EC_PROTO
bool
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index e2a250892404..7c831d02c926 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_CROS_EC_RPMSG) += cros_ec_rpmsg.o
obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
cros_ec_lpcs-objs := cros_ec_lpc.o
-cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o
+cros_ec_lpcs-objs += cros_ec_lpc_mec.o
obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o
obj-$(CONFIG_CROS_EC_PROTO) += cros_ec_proto.o cros_ec_trace.o
obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT) += cros_kbd_led_backlight.o
diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
index 00a07c9337b7..b260786cc3cc 100644
--- a/drivers/platform/chrome/cros_ec_lpc.c
+++ b/drivers/platform/chrome/cros_ec_lpc.c
@@ -31,7 +31,26 @@
/* True if ACPI device is present */
static bool cros_ec_lpc_acpi_device_found;

-static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
+/**
+ * struct lpc_driver_ops - LPC driver operations
+ * @read: Copy length bytes from EC address offset into buffer dest. Returns
+ * the 8-bit checksum of all bytes read.
+ * @write: Copy length bytes from buffer msg into EC address offset. Returns
+ * the 8-bit checksum of all bytes written.
+ */
+struct lpc_driver_ops {
+ u8 (*read)(unsigned int offset, unsigned int length, u8 *dest);
+ u8 (*write)(unsigned int offset, unsigned int length, const u8 *msg);
+};
+
+static struct lpc_driver_ops cros_ec_lpc_ops = { };
+
+/*
+ * A generic instance of the read function of struct lpc_driver_ops, used for
+ * the LPC EC.
+ */
+static u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length,
+ u8 *dest)
{
int sum = 0;
int i;
@@ -45,7 +64,12 @@ static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
return sum;
}

-static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
+/*
+ * A generic instance of the write function of struct lpc_driver_ops, used for
+ * the LPC EC.
+ */
+static u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length,
+ const u8 *msg)
{
int sum = 0;
int i;
@@ -59,10 +83,12 @@ static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
return sum;
}

-#ifdef CONFIG_CROS_EC_LPC_MEC
-
-static u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length,
- u8 *dest)
+/*
+ * An instance of the read function of struct lpc_driver_ops, used for the
+ * MEC variant of LPC EC.
+ */
+static u8 cros_ec_lpc_mec_read_bytes(unsigned int offset, unsigned int length,
+ u8 *dest)
{
int in_range = cros_ec_lpc_mec_in_range(offset, length);

@@ -73,11 +99,15 @@ static u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length,
cros_ec_lpc_io_bytes_mec(MEC_IO_READ,
offset - EC_HOST_CMD_REGION0,
length, dest) :
- lpc_read_bytes(offset, length, dest);
+ cros_ec_lpc_read_bytes(offset, length, dest);
}

-static u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length,
- u8 *msg)
+/*
+ * An instance of the write function of struct lpc_driver_ops, used for the
+ * MEC variant of LPC EC.
+ */
+static u8 cros_ec_lpc_mec_write_bytes(unsigned int offset, unsigned int length,
+ const u8 *msg)
{
int in_range = cros_ec_lpc_mec_in_range(offset, length);

@@ -87,45 +117,10 @@ static u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length,
return in_range ?
cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE,
offset - EC_HOST_CMD_REGION0,
- length, msg) :
- lpc_write_bytes(offset, length, msg);
-}
-
-static void cros_ec_lpc_reg_init(void)
-{
- cros_ec_lpc_mec_init(EC_HOST_CMD_REGION0,
- EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE);
+ length, (u8 *)msg) :
+ cros_ec_lpc_write_bytes(offset, length, msg);
}

-static void cros_ec_lpc_reg_destroy(void)
-{
- cros_ec_lpc_mec_destroy();
-}
-
-#else /* CONFIG_CROS_EC_LPC_MEC */
-
-static u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length,
- u8 *dest)
-{
- return lpc_read_bytes(offset, length, dest);
-}
-
-static u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length,
- u8 *msg)
-{
- return lpc_write_bytes(offset, length, msg);
-}
-
-static void cros_ec_lpc_reg_init(void)
-{
-}
-
-static void cros_ec_lpc_reg_destroy(void)
-{
-}
-
-#endif /* CONFIG_CROS_EC_LPC_MEC */
-
static int ec_response_timed_out(void)
{
unsigned long one_second = jiffies + HZ;
@@ -133,7 +128,7 @@ static int ec_response_timed_out(void)

usleep_range(200, 300);
do {
- if (!(cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_CMD, 1, &data) &
+ if (!(cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_CMD, 1, &data) &
EC_LPC_STATUS_BUSY_MASK))
return 0;
usleep_range(100, 200);
@@ -153,11 +148,11 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
ret = cros_ec_prepare_tx(ec, msg);

/* Write buffer */
- cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout);
+ cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout);

/* Here we go */
sum = EC_COMMAND_PROTOCOL_3;
- cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
+ cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum);

if (ec_response_timed_out()) {
dev_warn(ec->dev, "EC responsed timed out\n");
@@ -166,15 +161,15 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
}

/* Check result */
- msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
+ msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum);
ret = cros_ec_check_result(ec, msg);
if (ret)
goto done;

/* Read back response */
dout = (u8 *)&response;
- sum = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET, sizeof(response),
- dout);
+ sum = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET, sizeof(response),
+ dout);

msg->result = response.result;

@@ -187,9 +182,9 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
}

/* Read response and process checksum */
- sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET +
- sizeof(response), response.data_len,
- msg->data);
+ sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET +
+ sizeof(response), response.data_len,
+ msg->data);

if (sum) {
dev_err(ec->dev,
@@ -229,17 +224,17 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
sum = msg->command + args.flags + args.command_version + args.data_size;

/* Copy data and update checksum */
- sum += cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PARAM, msg->outsize,
- msg->data);
+ sum += cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PARAM, msg->outsize,
+ msg->data);

/* Finalize checksum and write args */
args.checksum = sum;
- cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
- (u8 *)&args);
+ cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
+ (u8 *)&args);

/* Here we go */
sum = msg->command;
- cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
+ cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum);

if (ec_response_timed_out()) {
dev_warn(ec->dev, "EC responsed timed out\n");
@@ -248,14 +243,13 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
}

/* Check result */
- msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
+ msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum);
ret = cros_ec_check_result(ec, msg);
if (ret)
goto done;

/* Read back args */
- cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
- (u8 *)&args);
+ cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_ARGS, sizeof(args), (u8 *)&args);

if (args.data_size > msg->insize) {
dev_err(ec->dev,
@@ -269,8 +263,8 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
sum = msg->command + args.flags + args.command_version + args.data_size;

/* Read response and update checksum */
- sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PARAM, args.data_size,
- msg->data);
+ sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PARAM, args.data_size,
+ msg->data);

/* Verify checksum */
if (args.checksum != sum) {
@@ -300,13 +294,13 @@ static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset,

/* fixed length */
if (bytes) {
- cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + offset, bytes, s);
+ cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + offset, bytes, s);
return bytes;
}

/* string */
for (; i < EC_MEMMAP_SIZE; i++, s++) {
- cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + i, 1, s);
+ cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + i, 1, s);
cnt++;
if (!*s)
break;
@@ -343,10 +337,25 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
return -EBUSY;
}

- cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
+ /*
+ * Read the mapped ID twice, the first one is assuming the
+ * EC is a Microchip Embedded Controller (MEC) variant, if the
+ * protocol fails, fallback to the non MEC variant and try to
+ * read again the ID.
+ */
+ cros_ec_lpc_ops.read = cros_ec_lpc_mec_read_bytes;
+ cros_ec_lpc_ops.write = cros_ec_lpc_mec_write_bytes;
+ cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
if (buf[0] != 'E' || buf[1] != 'C') {
- dev_err(dev, "EC ID not detected\n");
- return -ENODEV;
+ /* Re-assign read/write operations for the non MEC variant */
+ cros_ec_lpc_ops.read = cros_ec_lpc_read_bytes;
+ cros_ec_lpc_ops.write = cros_ec_lpc_write_bytes;
+ cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2,
+ buf);
+ if (buf[0] != 'E' || buf[1] != 'C') {
+ dev_err(dev, "EC ID not detected\n");
+ return -ENODEV;
+ }
}

if (!devm_request_region(dev, EC_HOST_CMD_REGION0,
@@ -541,13 +550,14 @@ static int __init cros_ec_lpc_init(void)
return -ENODEV;
}

- cros_ec_lpc_reg_init();
+ cros_ec_lpc_mec_init(EC_HOST_CMD_REGION0,
+ EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE);

/* Register the driver */
ret = platform_driver_register(&cros_ec_lpc_driver);
if (ret) {
pr_err(DRV_NAME ": can't register driver: %d\n", ret);
- cros_ec_lpc_reg_destroy();
+ cros_ec_lpc_mec_destroy();
return ret;
}

@@ -557,7 +567,7 @@ static int __init cros_ec_lpc_init(void)
if (ret) {
pr_err(DRV_NAME ": can't register device: %d\n", ret);
platform_driver_unregister(&cros_ec_lpc_driver);
- cros_ec_lpc_reg_destroy();
+ cros_ec_lpc_mec_destroy();
}
}

@@ -569,7 +579,7 @@ static void __exit cros_ec_lpc_exit(void)
if (!cros_ec_lpc_acpi_device_found)
platform_device_unregister(&cros_ec_lpc_device);
platform_driver_unregister(&cros_ec_lpc_driver);
- cros_ec_lpc_reg_destroy();
+ cros_ec_lpc_mec_destroy();
}

module_init(cros_ec_lpc_init);
diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig
index fd29cbfd3d5d..c63ff2508409 100644
--- a/drivers/platform/chrome/wilco_ec/Kconfig
+++ b/drivers/platform/chrome/wilco_ec/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config WILCO_EC
tristate "ChromeOS Wilco Embedded Controller"
- depends on ACPI && X86 && CROS_EC_LPC && CROS_EC_LPC_MEC
+ depends on ACPI && X86 && CROS_EC_LPC
help
If you say Y here, you get support for talking to the ChromeOS
Wilco EC over an eSPI bus. This uses a simple byte-level protocol
--
2.20.1
\
 
 \ /
  Last update: 2019-06-14 23:44    [W:0.099 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site