lkml.org 
[lkml]   [2019]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v1 4/6] ASoC: sgtl5000: Fix charge pump source assignment
Date
On Tue, 2019-05-21 at 13:36 +0300, Oleksandr Suvorov wrote:
> If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
> source can be assigned automatically.
>
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

> ---
>
> sound/soc/codecs/sgtl5000.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git sound/soc/codecs/sgtl5000.c sound/soc/codecs/sgtl5000.c
> index e813a37910af..ee1e4bf61322 100644
> --- sound/soc/codecs/sgtl5000.c
> +++ sound/soc/codecs/sgtl5000.c
> @@ -1174,12 +1174,16 @@ static int sgtl5000_set_power_regs(struct
> snd_soc_component *component)
> SGTL5000_INT_OSC_EN);
> /* Enable VDDC charge pump */
> ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
> - } else if (vddio >= 3100 && vdda >= 3100) {
> + } else {
> ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
> - /* VDDC use VDDIO rail */
> - lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
> - lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
> - SGTL5000_VDDC_MAN_ASSN_SHIFT;
> + /* if vddio == vdda the source of charge pump should be
> + * assigned manually to VDDIO
> + */
> + if (vddio == vdda) {
> + lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
> + lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
> + SGTL5000_VDDC_MAN_ASSN_SHIFT;
> + }
> }
>
> snd_soc_component_write(component, SGTL5000_CHIP_LINREG_CTRL,
> lreg_ctrl);
> --
> 2.20.1
\
 
 \ /
  Last update: 2019-06-13 17:53    [W:0.157 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site