lkml.org 
[lkml]   [2019]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectBUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70
hello ,


[ 55.169278] ==================================================================
[ 55.169899] BUG: KASAN: global-out-of-bounds in
ata_exec_internal_sg+0x50f/0xc70 [libata]
[ 55.170039] Read of size 16 at addr ffffffffc0723500 by task scsi_eh_1/149


[ 55.186354] The buggy address belongs to the variable:
[ 55.186972] cdb.48295+0x0/0xfffffffffffeab00 [libata]

[ 55.187171] Memory state around the buggy address:
[ 55.187290] ffffffffc0723400: 00 00 fa fa fa fa fa fa 00 00 fa fa
fa fa fa fa
[ 55.187417] ffffffffc0723480: 00 00 00 00 00 00 00 00 05 fa fa fa
fa fa fa fa
[ 55.187544] >ffffffffc0723500: 00 04 fa fa fa fa fa fa 00 00 fa fa
fa fa fa fa
[ 55.187686] ^
[ 55.187810] ffffffffc0723580: 00 00 05 fa fa fa fa fa 00 00 00 00
00 00 00 00
[ 55.187940] ffffffffc0723600: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
[ 55.188060] ==================================================================

output of dmesg with the filename kasan.txt attached



--
software engineer
rajagiri school of engineering and technology
[ 0.000000] microcode: microcode updated early to revision 0x368, date = 2019-04-23
[ 0.000000] Linux version 5.2.0-rc1+ (root@debian) (gcc version 8.3.0 (Debian 8.3.0-7)) #4 SMP Wed Jun 12 02:11:23 IST 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-rc1+ root=UUID=a054425d-89dc-4d7a-a928-e5a87f57dc8d ro quiet
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000075a76fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000075a77000-0x0000000075e76fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000075e77000-0x0000000076f76fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000076f77000-0x0000000076fb6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000076fb7000-0x0000000077ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bc00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: HP HP Notebook/80C5, BIOS F.1E 12/25/2015
[ 0.000000] tsc: Detected 1600.000 MHz processor
[ 0.008208] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.008218] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.008268] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.008280] MTRR default type: uncachable
[ 0.008285] MTRR fixed ranges enabled:
[ 0.008291] 00000-9FFFF write-back
[ 0.008297] A0000-BFFFF uncachable
[ 0.008303] C0000-FFFFF write-protect
[ 0.008307] MTRR variable ranges enabled:
[ 0.008315] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.008322] 1 base 0FFA00000 mask FFFE00000 write-protect
[ 0.008329] 2 base 000000000 mask F80000000 write-back
[ 0.008336] 3 base 07C000000 mask FFC000000 uncachable
[ 0.008343] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.008350] 5 base 100000000 mask F80000000 write-back
[ 0.008353] 6 disabled
[ 0.008357] 7 disabled
[ 0.008971] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.009189] last_pfn = 0x78000 max_arch_pfn = 0x400000000
[ 0.022987] BRK [0x134a01000, 0x134a01fff] PGTABLE
[ 0.022997] BRK [0x134a02000, 0x134a02fff] PGTABLE
[ 0.023002] BRK [0x134a03000, 0x134a03fff] PGTABLE
[ 0.023803] BRK [0x134a04000, 0x134a04fff] PGTABLE
[ 0.026435] BRK [0x134a05000, 0x134a05fff] PGTABLE
[ 0.027157] BRK [0x134a06000, 0x134a06fff] PGTABLE
[ 0.028226] BRK [0x134a07000, 0x134a07fff] PGTABLE
[ 0.030392] RAMDISK: [mem 0x2b309000-0x3197bfff]
[ 0.030419] ACPI: Early table checksum verification disabled
[ 0.030754] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[ 0.030768] ACPI: XSDT 0x0000000076FB6120 0000A4 (v01 HPQOEM SLIC-MPC 00000003 HP 01000013)
[ 0.030796] ACPI: FACP 0x0000000076FAA000 00010C (v05 HPQOEM SLIC-MPC 00000003 HP 00040000)
[ 0.030828] ACPI: DSDT 0x0000000076F9C000 00A70D (v02 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
[ 0.030848] ACPI: FACS 0x0000000076F72000 000040
[ 0.030863] ACPI: TCPA 0x0000000076FB5000 000032 (v02 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.030883] ACPI: UEFI 0x0000000076FB4000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.030902] ACPI: MSDM 0x0000000076FB3000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.030922] ACPI: UEFI 0x0000000076FB2000 000042 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.030941] ACPI: SSDT 0x0000000076FAB000 0066C3 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.030960] ACPI: MCFG 0x0000000076FA8000 00003C (v01 HPQOEM INSYDE 00000003 HP 00040000)
[ 0.030979] ACPI: SSDT 0x0000000076FA7000 0005F4 (v01 HPQOEM CpuDptf 00000003 ACPI 00040000)
[ 0.030998] ACPI: SSDT 0x0000000076F9B000 0009F8 (v01 HPQOEM DptfTab 00000003 ACPI 00040000)
[ 0.031018] ACPI: SSDT 0x0000000076F9A000 000763 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.031037] ACPI: SSDT 0x0000000076F99000 000290 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.031056] ACPI: SSDT 0x0000000076F98000 00017A (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.031075] ACPI: APIC 0x0000000076FA9000 000084 (v03 HPQOEM SLIC-MPC 00000003 HP 00040000)
[ 0.031095] ACPI: SSDT 0x0000000076F97000 000432 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.031114] ACPI: TPM2 0x0000000076F96000 000034 (v03 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.031133] ACPI: FPDT 0x0000000076F95000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
[ 0.031173] ACPI: Local APIC address 0xfee00000
[ 0.032105] No NUMA configuration found
[ 0.032111] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.032137] NODE_DATA(0) allocated [mem 0x17fffa000-0x17fffefff]
[ 0.032293] Zone ranges:
[ 0.032298] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.032305] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.032311] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.032317] Device empty
[ 0.032321] Movable zone start for each node
[ 0.032324] Early memory node ranges
[ 0.032330] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.032335] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.032340] node 0: [mem 0x0000000020200000-0x0000000075a76fff]
[ 0.032345] node 0: [mem 0x0000000076fb7000-0x0000000077ffffff]
[ 0.032350] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.033151] Zeroed struct page in unavailable ranges: 6051 pages
[ 0.033159] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.033170] On node 0 totalpages: 1009757
[ 0.033176] DMA zone: 64 pages used for memmap
[ 0.033180] DMA zone: 21 pages reserved
[ 0.033185] DMA zone: 3997 pages, LIFO batch:0
[ 0.036630] DMA32 zone: 7523 pages used for memmap
[ 0.036637] DMA32 zone: 481472 pages, LIFO batch:63
[ 0.231511] Normal zone: 8192 pages used for memmap
[ 0.231522] Normal zone: 524288 pages, LIFO batch:63
[ 0.626178] kasan: KernelAddressSanitizer initialized
[ 0.626216] Reserving Intel graphics memory at [mem 0x7c800000-0x7e7fffff]
[ 0.626384] ACPI: PM-Timer IO Port: 0x408
[ 0.626395] ACPI: Local APIC address 0xfee00000
[ 0.626429] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.626435] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.626439] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.626444] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.626479] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.626491] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.626500] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.626508] ACPI: IRQ0 used by override.
[ 0.626514] ACPI: IRQ9 used by override.
[ 0.626526] Using ACPI (MADT) for SMP configuration information
[ 0.626540] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.626730] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.626746] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.626750] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.626754] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.626758] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.626773] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.626787] PM: Registered nosave memory: [mem 0x75a77000-0x75e76fff]
[ 0.626792] PM: Registered nosave memory: [mem 0x75e77000-0x76f76fff]
[ 0.626796] PM: Registered nosave memory: [mem 0x76f77000-0x76fb6fff]
[ 0.626811] PM: Registered nosave memory: [mem 0x78000000-0x7bbfffff]
[ 0.626815] PM: Registered nosave memory: [mem 0x7bc00000-0x7fffffff]
[ 0.626819] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.626823] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.626827] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff]
[ 0.626831] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[ 0.626835] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.626840] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.626844] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.626848] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.626852] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[ 0.626856] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[ 0.626860] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[ 0.626864] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[ 0.626868] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[ 0.626872] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[ 0.626876] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[ 0.626880] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[ 0.626885] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[ 0.626889] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.626893] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.626897] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.626909] [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.626914] Booting paravirtualized kernel on bare hardware
[ 0.626927] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 2.112476] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 2.113804] percpu: Embedded 61 pages/cpu s212888 r8192 d28776 u524288
[ 2.113875] pcpu-alloc: s212888 r8192 d28776 u524288 alloc=1*2097152
[ 2.113881] pcpu-alloc: [0] 0 1 2 3
[ 2.114063] Built 1 zonelists, mobility grouping on. Total pages: 993957
[ 2.114068] Policy zone: Normal
[ 2.114078] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-rc1+ root=UUID=a054425d-89dc-4d7a-a928-e5a87f57dc8d ro quiet
[ 2.145060] Calgary: detecting Calgary via BIOS EBDA area
[ 2.145097] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 2.432483] Memory: 3196292K/4039028K available (20484K kernel code, 19327K rwdata, 10672K rodata, 2236K init, 16444K bss, 842736K reserved, 0K cma-reserved)
[ 2.435863] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 2.435994] Kernel/User page tables isolation: enabled
[ 2.436125] ftrace: allocating 33588 entries in 132 pages
[ 2.502846] rcu: Hierarchical RCU implementation.
[ 2.502855] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 2.502862] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 2.502866] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 2.559486] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[ 2.560969] random: get_random_bytes called from start_kernel+0x626/0xa45 with crng_init=0
[ 2.564893] Console: colour VGA+ 80x25
[ 2.564910] printk: console [tty0] enabled
[ 2.565182] ACPI: Core revision 20190509
[ 2.569559] APIC: Switch to symmetric I/O mode setup
[ 2.573990] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 2.593521] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 2.593546] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[ 2.593559] pid_max: default: 32768 minimum: 301
[ 2.594624] LSM: Security Framework initializing
[ 2.594897] Yama: becoming mindful.
[ 2.595141] SELinux: Initializing.
[ 2.595904] *** VALIDATE SELinux ***
[ 2.595944] TOMOYO Linux initialized
[ 2.599618] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 2.601606] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.601973] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.602154] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.606055] *** VALIDATE proc ***
[ 2.607715] *** VALIDATE cgroup1 ***
[ 2.607725] *** VALIDATE cgroup2 ***
[ 2.608231] mce: CPU0: Thermal monitoring enabled (TM1)
[ 2.608243] process: using mwait in idle threads
[ 2.608259] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 2.608264] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 2.608273] Spectre V2 : Mitigation: Full generic retpoline
[ 2.608276] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 2.608279] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 2.608294] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 2.608307] MDS: Mitigation: Clear CPU buffers
[ 2.609024] Freeing SMP alternatives memory: 20K
[ 2.619063] TSC deadline timer enabled
[ 2.619077] smpboot: CPU0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[ 2.621198] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 2.621361] ... version: 3
[ 2.621366] ... bit width: 40
[ 2.621368] ... generic registers: 2
[ 2.621373] ... value mask: 000000ffffffffff
[ 2.621376] ... max period: 0000007fffffffff
[ 2.621379] ... fixed-purpose events: 3
[ 2.621382] ... event mask: 0000000700000003
[ 2.621533] rcu: Hierarchical SRCU implementation.
[ 2.628531] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 2.629809] smp: Bringing up secondary CPUs ...
[ 2.631991] x86: Booting SMP configuration:
[ 2.631997] .... node #0, CPUs: #1
[ 2.678738] smp: Brought up 1 node, 2 CPUs
[ 2.678738] smpboot: Max logical packages: 2
[ 2.678738] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[ 2.687958] devtmpfs: initialized
[ 2.691506] x86/mm: Memory block size: 128MB
[ 2.715818] version magic: 0x4138332a
[ 2.730942] PM: Registering ACPI NVS region [mem 0x75e77000-0x76f76fff] (17825792 bytes)
[ 2.823370] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 2.823494] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.824949] pinctrl core: initialized pinctrl subsystem
[ 2.832267] NET: Registered protocol family 16
[ 2.836650] audit: initializing netlink subsys (disabled)
[ 2.837249] audit: type=2000 audit(1560375786.264:1): state=initialized audit_enabled=0 res=1
[ 2.843188] cpuidle: using governor ladder
[ 2.843230] cpuidle: using governor menu
[ 2.843795] ACPI: bus type PCI registered
[ 2.843803] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.845880] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 2.846031] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 2.846197] PCI: Using configuration type 1 for base access
[ 2.851474] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 2.899123] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 5.891159] alg: No test for lzo-rle (lzo-rle-generic)
[ 5.894947] alg: No test for lzo-rle (lzo-rle-scomp)
[ 5.905050] ACPI: Added _OSI(Module Device)
[ 5.905057] ACPI: Added _OSI(Processor Device)
[ 5.905063] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 5.905068] ACPI: Added _OSI(Processor Aggregator Device)
[ 5.905135] ACPI: Added _OSI(Linux-Dell-Video)
[ 5.905197] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 5.905259] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 7.042116] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 7.141451] ACPI: Dynamic OEM Table Load:
[ 7.141507] ACPI: SSDT 0xFFFF88815AAE2A80 000634 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 7.199069] ACPI: Dynamic OEM Table Load:
[ 7.199118] ACPI: SSDT 0xFFFF88815A105A00 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 7.259138] ACPI: Dynamic OEM Table Load:
[ 7.259182] ACPI: SSDT 0xFFFF88815A65A800 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 7.278863] ACPI: Dynamic OEM Table Load:
[ 7.278904] ACPI: SSDT 0xFFFF88815A5DD200 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 7.323451] ACPI: EC: EC started
[ 7.323457] ACPI: EC: interrupt blocked
[ 7.371886] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 7.371948] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 7.372002] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 7.372018] ACPI: Interpreter enabled
[ 7.372751] ACPI: (supports S0 S3 S4 S5)
[ 7.372758] ACPI: Using IOAPIC for interrupt routing
[ 7.374278] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 7.410564] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 7.536050] ACPI: Power Resource [USBC] (on)
[ 7.816862] ACPI: Power Resource [CLK0] (on)
[ 7.819607] ACPI: Power Resource [CLK1] (on)
[ 8.041477] ACPI: Power Resource [ID3C] (off)
[ 8.324404] ACPI: Power Resource [FN00] (off)
[ 8.355706] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 8.355859] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 8.361369] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 8.362183] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 8.410026] PCI host bridge to bus 0000:00
[ 8.410084] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 8.410133] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 8.410180] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 8.410227] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 8.410274] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 8.410320] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 8.410366] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 8.410413] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 8.410462] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 8.410565] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 8.423382] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 8.423446] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 8.423477] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 8.423500] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 8.434086] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[ 8.434147] pci 0000:00:0b.0: reg 0x10: [mem 0x91514000-0x91514fff 64bit]
[ 8.444750] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 8.444850] pci 0000:00:13.0: reg 0x20: [io 0x3060-0x307f]
[ 8.444875] pci 0000:00:13.0: reg 0x24: [mem 0x91515000-0x915157ff]
[ 8.445255] pci 0000:00:13.0: PME# supported from D3hot
[ 8.458414] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 8.458485] pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
[ 8.458922] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 8.471325] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 8.471378] pci 0000:00:1a.0: reg 0x10: [mem 0x91400000-0x914fffff]
[ 8.471403] pci 0000:00:1a.0: reg 0x14: [mem 0x91300000-0x913fffff]
[ 8.471827] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 8.482270] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 8.482331] pci 0000:00:1b.0: reg 0x10: [mem 0x91510000-0x91513fff 64bit]
[ 8.482759] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 8.493160] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 8.493709] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 8.504314] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[ 8.504852] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 8.515446] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[ 8.515972] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 8.526737] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 8.537339] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 8.537432] pci 0000:00:1f.3: reg 0x10: [mem 0x91516000-0x9151601f]
[ 8.537561] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 8.550518] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 8.552987] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[ 8.553079] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 8.553149] pci 0000:02:00.0: reg 0x18: [mem 0x91200000-0x91203fff 64bit]
[ 8.554141] pci 0000:02:00.0: supports D1 D2
[ 8.554152] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 8.557691] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 8.557707] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 8.557721] pci 0000:00:1c.2: bridge window [mem 0x91200000-0x912fffff]
[ 8.560159] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 8.560226] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 8.560281] pci 0000:03:00.0: reg 0x18: [mem 0x91100000-0x91100fff 64bit]
[ 8.560318] pci 0000:03:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit pref]
[ 8.561244] pci 0000:03:00.0: supports D1 D2
[ 8.561254] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 8.564723] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 8.564739] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 8.564754] pci 0000:00:1c.3: bridge window [mem 0x91100000-0x911fffff]
[ 8.564771] pci 0000:00:1c.3: bridge window [mem 0x91000000-0x910fffff 64bit pref]
[ 8.673585] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 8.680943] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 8.688371] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 8.695826] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 8.703299] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 8.710784] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 8.718241] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 8.725618] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 8.764646] ACPI: EC: interrupt unblocked
[ 8.764698] ACPI: EC: event unblocked
[ 8.764868] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 8.764948] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 8.767574] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 8.767574] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 8.767574] pci 0000:00:02.0: vgaarb: bridge control possible
[ 8.767574] vgaarb: loaded
[ 8.782285] pps_core: LinuxPPS API ver. 1 registered
[ 8.782312] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 8.783861] PTP clock support registered
[ 8.785319] EDAC MC: Ver: 3.0.0
[ 8.799088] PCI: Using ACPI for IRQ routing
[ 8.801575] PCI: pci_cache_line_size set to 64 bytes
[ 8.801723] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 8.801892] e820: reserve RAM buffer [mem 0x75a77000-0x77ffffff]
[ 8.838631] clocksource: Switched to clocksource tsc-early
[ 10.539960] VFS: Disk quotas dquot_6.6.0
[ 10.540630] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 10.543222] *** VALIDATE hugetlbfs ***
[ 10.548720] pnp: PnP ACPI init
[ 10.558432] system 00:00: [io 0x0680-0x069f] has been reserved
[ 10.558751] system 00:00: [io 0x0400-0x047f] has been reserved
[ 10.559064] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 10.559577] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.573327] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 10.579413] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 10.585385] pnp 00:03: Plug and Play ACPI device, IDs SYN1efb PNP0f13 (active)
[ 10.933059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.951696] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 10.952018] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[ 10.952380] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 10.952694] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 10.953006] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[ 10.953319] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
[ 10.953716] system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved
[ 10.954036] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 10.954349] system 00:05: [mem 0xfedf0000-0xfedf0fff] has been reserved
[ 10.954800] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 10.955306] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.995957] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 11.043699] pnp: PnP ACPI: found 7 devices
[ 11.246543] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 11.246731] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 11.246874] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 11.247008] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 11.247648] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91600000-0x917fffff]
[ 11.247783] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91800000-0x919fffff 64bit pref]
[ 11.247844] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 11.248257] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 11.248297] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 11.248339] pci 0000:00:1c.0: bridge window [mem 0x91600000-0x917fffff]
[ 11.248378] pci 0000:00:1c.0: bridge window [mem 0x91800000-0x919fffff 64bit pref]
[ 11.248422] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 11.248455] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 11.248495] pci 0000:00:1c.2: bridge window [mem 0x91200000-0x912fffff]
[ 11.248545] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 11.248577] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 11.248616] pci 0000:00:1c.3: bridge window [mem 0x91100000-0x911fffff]
[ 11.248655] pci 0000:00:1c.3: bridge window [mem 0x91000000-0x910fffff 64bit pref]
[ 11.248700] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 11.248731] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 11.248760] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 11.248789] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 11.248818] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 11.248848] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 11.248877] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 11.248908] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 11.248937] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 11.248965] pci_bus 0000:01: resource 1 [mem 0x91600000-0x917fffff]
[ 11.248995] pci_bus 0000:01: resource 2 [mem 0x91800000-0x919fffff 64bit pref]
[ 11.249023] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 11.249051] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[ 11.249080] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 11.249107] pci_bus 0000:03: resource 1 [mem 0x91100000-0x911fffff]
[ 11.249138] pci_bus 0000:03: resource 2 [mem 0x91000000-0x910fffff 64bit pref]
[ 11.266432] NET: Registered protocol family 2
[ 11.278333] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 11.279405] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 11.282368] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 11.284442] TCP: Hash tables configured (established 32768 bind 32768)
[ 11.287486] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 11.288343] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 11.294980] NET: Registered protocol family 1
[ 11.295611] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 11.342390] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0xd93 took 45442 usecs
[ 11.342921] PCI: CLS 64 bytes, default 64
[ 11.347281] Unpacking initramfs...
[ 45.200383] Freeing initrd memory: 104908K
[ 45.200401] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 45.200409] software IO TLB: mapped [mem 0x71a77000-0x75a77000] (64MB)
[ 45.200679] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 45.200833] clocksource: Switched to clocksource tsc
[ 47.952952] Initialise system trusted keyrings
[ 47.954199] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 48.061094] zbud: loaded
[ 48.081280] Key type asymmetric registered
[ 48.081289] Asymmetric key parser 'x509' registered
[ 48.081633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 48.082514] io scheduler mq-deadline registered
[ 48.116608] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 48.117105] intel_idle: MWAIT substates: 0x33000020
[ 48.117111] intel_idle: v0.4.1 model 0x4C
[ 48.127207] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 48.297723] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 48.319409] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 48.333351] Linux agpgart interface v0.103
[ 48.334830] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 48.334835] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 48.339678] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[ 48.348243] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 48.369440] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 48.369580] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 48.373528] mousedev: PS/2 mouse device common for all mice
[ 48.374956] rtc_cmos 00:06: RTC can wake from S4
[ 48.375693] rtc rtc0: alarm rollover: day
[ 48.377270] rtc_cmos 00:06: char device (252:0)
[ 48.377314] rtc_cmos 00:06: registered as rtc0
[ 48.378367] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram
[ 48.381378] rtc-test rtc-test.0: char device (252:1)
[ 48.381391] rtc-test rtc-test.0: registered as rtc1
[ 48.409555] rtc rtc2: invalid alarm value: 18446744073704833230-12-19T11:20:22
[ 48.418131] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 48.419639] rtc-test rtc-test.1: char device (252:2)
[ 48.419699] rtc-test rtc-test.1: registered as rtc2
[ 48.507101] rtc rtc3: invalid alarm value: 18446744073704833230-12-19T11:20:22
[ 48.511405] rtc-test rtc-test.2: char device (252:3)
[ 48.511442] rtc-test rtc-test.2: registered as rtc3
[ 48.511918] intel_pstate: Intel P-state driver initializing
[ 48.517844] ledtrig-cpu: registered to indicate activity on CPUs
[ 48.549246] NET: Registered protocol family 10
[ 48.690129] Segment Routing with IPv6
[ 48.690880] mip6: Mobile IPv6
[ 48.691253] NET: Registered protocol family 17
[ 48.691430] mpls_gso: MPLS GSO support
[ 48.697540] mce: Using 6 MCE banks
[ 48.698913] microcode: sig=0x406c3, pf=0x1, revision=0x368
[ 48.700791] microcode: Microcode Update Driver: v2.2.
[ 48.701066] sched_clock: Marking stable (48691548925, 8934387)->(48761416050, -60932738)
[ 48.710985] registered taskstats version 1
[ 48.710992] Loading compiled-in X.509 certificates
[ 48.712018] zswap: loaded using pool lzo/zbud
[ 48.744547] rtc_cmos 00:06: setting system clock to 2019-06-12T21:43:52 UTC (1560375832)
[ 48.801189] Freeing unused kernel image memory: 2236K
[ 48.813976] Write protecting the kernel read-only data: 34816k
[ 48.818961] Freeing unused kernel image memory: 2036K
[ 48.822479] Freeing unused kernel image memory: 1616K
[ 49.033980] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 49.034215] x86/mm: Checking user space page tables
[ 49.139047] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 49.139081] Run /init as init process
[ 51.955442] video: module verification failed: signature and/or required key missing - tainting kernel
[ 52.903401] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 53.200434] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 53.457208] libphy: r8169: probed
[ 53.590518] r8169 0000:03:00.0 eth0: RTL8106e, 70:5a:0f:b9:d8:5c, XID 449, IRQ 118
[ 53.748342] SCSI subsystem initialized
[ 53.824490] ACPI: bus type USB registered
[ 53.839964] usbcore: registered new interface driver usbfs
[ 53.841285] usbcore: registered new interface driver hub
[ 53.851865] usbcore: registered new device driver usb
[ 53.862664] thermal LNXTHERM:00: registered as thermal_zone0
[ 53.862678] ACPI: Thermal Zone [TZ01] (27 C)
[ 54.012196] thermal LNXTHERM:01: registered as thermal_zone1
[ 54.012210] ACPI: Thermal Zone [TZ02] (28 C)
[ 54.176405] libata version 3.00 loaded.
[ 54.287976] ahci 0000:00:13.0: version 3.0
[ 54.398716] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 54.399733] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 54.418540] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[ 54.418575] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 54.458000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 54.458023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 54.458039] usb usb1: Product: xHCI Host Controller
[ 54.458055] usb usb1: Manufacturer: Linux 5.2.0-rc1+ xhci-hcd
[ 54.458069] usb usb1: SerialNumber: 0000:00:14.0
[ 54.520705] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 54.548263] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 54.548304] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm apst
[ 54.551454] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 54.551627] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 54.566520] hub 1-0:1.0: USB hub found
[ 54.575019] hub 1-0:1.0: 7 ports detected
[ 54.611897] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[ 54.654421] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 54.742140] random: fast init done
[ 54.748600] scsi host0: ahci
[ 54.809382] scsi host1: ahci
[ 54.838007] ata1: SATA max UDMA/133 abar m2048@0x91515000 port 0x91515100 irq 120
[ 54.838029] ata2: SATA max UDMA/133 abar m2048@0x91515000 port 0x91515180 irq 120
[ 55.160029] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 55.169278] ==================================================================
[ 55.169899] BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70 [libata]
[ 55.170039] Read of size 16 at addr ffffffffc0723500 by task scsi_eh_1/149

[ 55.170269] CPU: 1 PID: 149 Comm: scsi_eh_1 Tainted: G E 5.2.0-rc1+ #4
[ 55.170277] Hardware name: HP HP Notebook/80C5, BIOS F.1E 12/25/2015
[ 55.170283] Call Trace:
[ 55.170314] dump_stack+0xdd/0x12f
[ 55.170343] print_address_description+0x9e/0x36a
[ 55.170837] ? ata_exec_internal_sg+0x50f/0xc70 [libata]
[ 55.170863] __kasan_report.cold.2+0x5d/0xcf
[ 55.171347] ? ata_exec_internal_sg+0x50f/0xc70 [libata]
[ 55.171845] ? ata_exec_internal_sg+0x50f/0xc70 [libata]
[ 55.171864] kasan_report+0x1e/0x40
[ 55.171886] check_memory_region+0x289/0x2c0
[ 55.171907] __asan_loadN+0x1b/0x30
[ 55.172409] ata_exec_internal_sg+0x50f/0xc70 [libata]
[ 55.172824] ? scsi_error_handler+0x1f1/0xba0 [scsi_mod]
[ 55.173317] ? ata_qc_issue+0x710/0x710 [libata]
[ 55.173334] ? memset+0x45/0x60
[ 55.173785] ata_exec_internal+0xc0/0x140 [libata]
[ 55.174322] ? ata_dev_set_feature+0x1a0/0x1a0 [libata]
[ 55.174342] ? kasan_unpoison_shadow+0x38/0x60
[ 55.174364] ? kasan_kmalloc+0xd/0x20
[ 55.174886] zpodd_init+0x255/0x440 [libata]
[ 55.175392] ? zpodd_post_poweron+0x210/0x210 [libata]
[ 55.175890] ? ata_id_string+0x74/0xd0 [libata]
[ 55.175914] ? strnlen+0x3f/0x90
[ 55.176406] ata_dev_configure+0x1b16/0x1e70 [libata]
[ 55.176907] ? ata_hpa_resize+0x6f0/0x6f0 [libata]
[ 55.176933] ? _raw_write_lock_irq+0x150/0x150
[ 55.177433] ? ata_dev_read_id+0x525/0x800 [libata]
[ 55.177885] ? ata_dev_read_id+0x5e4/0x800 [libata]
[ 55.178379] ? ata_identify_page_supported+0x130/0x130 [libata]
[ 55.178470] ? ahci_stop_engine+0x150/0x150 [libahci]
[ 55.178498] ? _raw_write_lock_irq+0x150/0x150
[ 55.178989] ? ata_eh_clear_action+0x7a/0x1d0 [libata]
[ 55.179484] ata_eh_recover+0x1302/0x27e0 [libata]
[ 55.179988] ? sata_std_hardreset+0x100/0x100 [libata]
[ 55.180075] ? ahci_pmp_retry_softreset+0x180/0x180 [libahci]
[ 55.180167] ? ahci_do_hardreset+0x2b0/0x2b0 [libahci]
[ 55.180253] ? ahci_stop_engine+0x150/0x150 [libahci]
[ 55.180764] ? ata_link_nr_enabled+0x60/0x60 [libata]
[ 55.180790] ? stack_access_ok+0x35/0xd0
[ 55.180810] ? deref_stack_reg+0xad/0xf0
[ 55.181271] sata_pmp_error_handler+0xa6b/0x1280 [libata]
[ 55.181364] ? ahci_stop_engine+0x150/0x150 [libahci]
[ 55.181432] ? ahci_do_hardreset+0x2b0/0x2b0 [libahci]
[ 55.181529] ? ahci_pmp_retry_softreset+0x180/0x180 [libahci]
[ 55.182039] ? sata_std_hardreset+0x100/0x100 [libata]
[ 55.182059] ? ret_from_fork+0x34/0x40
[ 55.182532] ? sata_pmp_configure+0x3d0/0x3d0 [libata]
[ 55.182559] ? pwq_unbound_release_workfn+0x1e0/0x1e0
[ 55.182583] ? lock_timer_base+0xf0/0xf0
[ 55.182603] ? kasan_check_write+0x20/0x30
[ 55.182627] ? _raw_spin_lock_irqsave+0xe5/0x180
[ 55.182651] ? _raw_write_lock_irq+0x150/0x150
[ 55.182670] ? kasan_check_write+0x20/0x30
[ 55.182693] ? try_to_grab_pending+0x3a0/0x3a0
[ 55.182717] ? detach_if_pending+0x22/0x200
[ 55.182735] ? kasan_check_write+0x20/0x30
[ 55.182760] ? _raw_spin_lock_irqsave+0xe5/0x180
[ 55.182781] ? _raw_write_lock_irq+0x150/0x150
[ 55.182874] ahci_error_handler+0x97/0x110 [libahci]
[ 55.183380] ata_scsi_port_error_handler+0x5bc/0xf40 [libata]
[ 55.183883] ata_scsi_error+0x199/0x210 [libata]
[ 55.183909] ? __switch_to_asm+0x34/0x70
[ 55.183931] ? __switch_to_asm+0x40/0x70
[ 55.184425] ? ata_scsi_port_error_handler+0xf40/0xf40 [libata]
[ 55.184446] ? __switch_to_asm+0x40/0x70
[ 55.184860] ? scsi_eh_get_sense+0x4a0/0x4a0 [scsi_mod]
[ 55.185272] scsi_error_handler+0x1f1/0xba0 [scsi_mod]
[ 55.185298] ? finish_task_switch+0x1bc/0x640
[ 55.185316] ? __switch_to+0x46d/0x9e0
[ 55.185677] ? scsi_eh_get_sense+0x4a0/0x4a0 [scsi_mod]
[ 55.185699] ? __schedule+0x6f8/0xf40
[ 55.185720] ? kasan_check_write+0x20/0x30
[ 55.185747] ? _raw_spin_lock_irqsave+0xe5/0x180
[ 55.185770] ? _raw_write_lock_irq+0x150/0x150
[ 55.185789] ? __wake_up_common+0xb5/0x310
[ 55.186187] ? scsi_eh_get_sense+0x4a0/0x4a0 [scsi_mod]
[ 55.186204] kthread+0x20e/0x250
[ 55.186224] ? kthread_flush_work+0x260/0x260
[ 55.186249] ret_from_fork+0x35/0x40

[ 55.186354] The buggy address belongs to the variable:
[ 55.186972] cdb.48295+0x0/0xfffffffffffeab00 [libata]

[ 55.187171] Memory state around the buggy address:
[ 55.187290] ffffffffc0723400: 00 00 fa fa fa fa fa fa 00 00 fa fa fa fa fa fa
[ 55.187417] ffffffffc0723480: 00 00 00 00 00 00 00 00 05 fa fa fa fa fa fa fa
[ 55.187544] >ffffffffc0723500: 00 04 fa fa fa fa fa fa 00 00 fa fa fa fa fa fa
[ 55.187686] ^
[ 55.187810] ffffffffc0723580: 00 00 05 fa fa fa fa fa 00 00 00 00 00 00 00 00
[ 55.187940] ffffffffc0723600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 55.188060] ==================================================================
[ 55.188184] Disabling lock debugging due to kernel taint
[ 55.198729] ata2.00: ATAPI: hp DVDRW DU8A6SH, DH61, max UDMA/133
[ 55.206380] ata2.00: configured for UDMA/133
[ 55.209095] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 55.230149] ata1.00: ATA-8: ST500LT012-1DG142, 1003YAM1, max UDMA/133
[ 55.230172] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 55.261948] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 55.262399] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 55.262587] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 55.271917] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[ 55.271939] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 55.271957] usb usb2: Product: xHCI Host Controller
[ 55.271978] usb usb2: Manufacturer: Linux 5.2.0-rc1+ xhci-hcd
[ 55.271998] usb usb2: SerialNumber: 0000:00:14.0
[ 55.275849] ata1.00: configured for UDMA/133
[ 55.292060] hub 2-0:1.0: USB hub found
[ 55.294246] hub 2-0:1.0: 6 ports detected
[ 55.320941] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 YAM1 PQ: 0 ANSI: 5
[ 55.381151] scsi 1:0:0:0: CD-ROM hp DVDRW DU8A6SH DH61 PQ: 0 ANSI: 5
[ 55.586356] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 55.728302] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 55.728327] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 55.728706] sd 0:0:0:0: [sda] Write Protect is off
[ 55.728727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 55.729648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 55.742381] usb 1-5: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 55.742406] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 55.742426] usb 1-5: Product: USB 2.0 Hub
[ 55.763884] hub 1-5:1.0: USB hub found
[ 55.770423] hub 1-5:1.0: 4 ports detected
[ 55.787202] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 55.787381] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 55.870232] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 56.063451] i915 0000:00:02.0: Disabling error capture for VT-d workaround
[ 56.064731] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 56.090386] Console: switching to colour dummy device 80x25
[ 56.097149] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 56.097158] [drm] Driver supports precise vblank timestamp query.
[ 56.134705] sda: sda1 sda2 < sda5 >
[ 56.188461] sd 0:0:0:0: [sda] Attached SCSI disk
[ 56.215651] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 56.229705] usb 1-5.3: new full-speed USB device number 3 using xhci_hcd
[ 56.455346] usb 1-5.3: New USB device found, idVendor=0bda, idProduct=b006, bcdDevice= 2.00
[ 56.455358] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 56.455364] usb 1-5.3: Product: Bluetooth Radio
[ 56.455373] usb 1-5.3: Manufacturer: Realtek
[ 56.455379] usb 1-5.3: SerialNumber: 00e04c000001
[ 56.526857] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 1
[ 56.783903] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 57.014532] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 57.237373] fbcon: i915drmfb (fb0) is primary device
[ 58.506853] Console: switching to colour frame buffer device 170x48
[ 58.547753] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 59.363273] PM: Image not found (code -22)
[ 59.441608] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 59.441619] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 59.441627] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ 59.441644] PM: Marking nosave pages: [mem 0x75a77000-0x76fb6fff]
[ 59.441786] PM: Marking nosave pages: [mem 0x78000000-0xffffffff]
[ 59.445164] PM: Basic memory bitmaps created
[ 59.447350] PM: Basic memory bitmaps freed
[ 61.046335] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 61.627396] random: crng init done
[ 62.455597] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 65.239586] systemd[1]: Inserted module 'autofs4'
[ 65.681000] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 65.707214] systemd[1]: Detected architecture x86-64.
[ 65.777161] systemd[1]: Set hostname to <debian>.
[ 65.796699] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 70.430171] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 70.595439] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 70.595917] systemd[1]: Reached target User and Group Name Lookups.
[ 70.600025] systemd[1]: Listening on udev Control Socket.
[ 70.602910] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 70.605125] systemd[1]: Listening on Journal Socket (/dev/log).
[ 70.708451] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 70.796792] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 70.902312] systemd[1]: Starting Journal Service...
[ 70.903228] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 71.055548] systemd[1]: Starting Load Kernel Modules...
[ 71.204088] systemd[1]: Starting udev Coldplug all Devices...
[ 71.416966] systemd[1]: Mounting POSIX Message Queue File System...
[ 71.857250] systemd[1]: Mounting RPC Pipe File System...
[ 71.874357] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 72.148230] lp: driver loaded but no devices found
[ 72.238338] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 72.354485] ppdev: user-space parallel port driver
[ 73.370438] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 74.073397] loop: module loaded
[ 74.350045] RPC: Registered named UNIX socket transport module.
[ 74.350058] RPC: Registered udp transport module.
[ 74.350065] RPC: Registered tcp transport module.
[ 74.350071] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 75.760031] systemd[1]: Started Load/Save Random Seed.
[ 76.055055] systemd[1]: Started Create System Users.
[ 76.201720] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 76.313476] systemd[1]: Started Apply Kernel Variables.
[ 76.726719] systemd[1]: Started Journal Service.
[ 77.261070] systemd-journald[233]: Received request to flush runtime journal from PID 1
[ 84.973094] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input4
[ 84.976105] ACPI: Lid Switch [LID0]
[ 84.985874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 85.022588] ACPI: Power Button [PWRF]
[ 85.089829] input: HP Wireless hotkeys as /devices/virtual/input/input6
[ 86.734797] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[ 86.878801] ACPI: AC Adapter [ACAD] (on-line)
[ 89.070874] iTCO_vendor_support: vendor-support=0
[ 89.335157] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 89.473885] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[ 89.655624] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 89.693993] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 89.776750] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 89.808995] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 89.911193] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 90.752390] proc_thermal 0000:00:0b.0: Creating sysfs group for PROC_THERMAL_PCI
[ 91.435268] cryptd: max_cpu_qlen set to 1000
[ 92.294883] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 92.690934] SSE version of gcm_enc/dec engaged.
[ 100.718996] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 100.772881] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 100.891191] Bluetooth: Core ver 2.22
[ 100.892885] NET: Registered protocol family 31
[ 100.892891] Bluetooth: HCI device and connection manager initialized
[ 100.955027] Bluetooth: HCI socket layer initialized
[ 100.955147] Bluetooth: L2CAP socket layer initialized
[ 100.955544] Bluetooth: SCO socket layer initialized
[ 101.146225] intel_rapl: Found RAPL domain package
[ 101.146236] intel_rapl: Found RAPL domain core
[ 101.429434] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 101.429469] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 101.429490] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 101.429504] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 101.429517] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 101.429535] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 101.437739] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 102.345105] usbcore: registered new interface driver btusb
[ 102.355136] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723

[ 102.358452] Bluetooth: hci0: RTL: rom_version status=0 version=1

[ 102.358584] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_fw.bin

[ 102.442811] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_config.bin

[ 102.444864] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 102.445165] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496

[ 102.636822] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 102.676359] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 102.721157] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 102.747635] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 102.971170] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 102.981915] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 102.982058] cfg80211: failed to load regulatory.db
[ 105.132683] hp_wmi: query 0xd returned error 0x5
[ 105.137610] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 107.413271] Adding 8075260k swap on /dev/sda5. Priority:-2 extents:1 across:8075260k FS
[ 109.010459] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[ 109.828653] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 109.956898] rtlwifi: rtlwifi: wireless switch is on
[ 110.201916] rtl8723be 0000:02:00.0 wlp2s0: renamed from wlan0
[ 112.409963] cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
[ 113.838925] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 113.838936] Bluetooth: BNEP filters: protocol multicast
[ 113.839081] Bluetooth: BNEP socket layer initialized
[ 118.924802] cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
[ 120.938067] cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
[ 122.079818] cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
[ 123.096731] cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
[ 123.651829] cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
[ 124.110149] cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
[ 124.464433] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 124.597194] cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
[ 124.734609] r8169 0000:03:00.0 eth0: Link is Down
[ 125.012788] cgroup1: Unknown subsys name '__DEVEL__sane_behavior'
[ 137.675667] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[ 137.691131] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[ 137.697227] wlp2s0: authenticated
[ 137.715046] wlp2s0: associate with 0c:d2:b5:91:a8:0b (try 1/3)
[ 137.727393] wlp2s0: RX AssocResp from 0c:d2:b5:91:a8:0b (capab=0x411 status=0 aid=3)
[ 137.727875] wlp2s0: associated
[ 138.386946] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 151.614974] fuse: init (API version 7.30)
[ 161.516633] Bluetooth: RFCOMM TTY layer initialized
[ 161.516783] Bluetooth: RFCOMM socket layer initialized
[ 161.517128] Bluetooth: RFCOMM ver 1.11
[ 191.183337] rfkill: input handler disabled
[ 206.853312] clipit[1404]: segfault at 40 ip 00007f6b50c064bb sp 00007ffda0e2c3e0 error 4 in libX11.so.6.3.0[7f6b50bdf000+8a000]
[ 206.853357] Code: 31 c9 48 89 fb 48 8d 35 f3 05 00 00 48 83 ec 10 64 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 48 8b 87 30 0a 00 00 49 89 e0 <8b> 50 40 85 d2 48 89 fa 48 8b 38 0f 95 c1 e8 32 a9 fd ff 85 c0 74
[ 247.338113] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 319.613298] perf: interrupt took too long (3270 > 3130), lowering kernel.perf_event_max_sample_rate to 61000
[ 466.652030] perf: interrupt took too long (4098 > 4087), lowering kernel.perf_event_max_sample_rate to 48750
\
 
 \ /
  Last update: 2019-06-13 20:38    [W:0.359 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site