lkml.org 
[lkml]   [2019]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: milbeaut-m10v-hdmac: Add Socionext Milbeaut HDMAC bindings
Date
From: Jassi Brar <jaswinder.singh@linaro.org>

Document the devicetree bindings for Socionext Milbeaut HDMAC
controller. Controller has upto 8 floating channels, that need
a predefined slave-id to work from a set of slaves.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
---
.../bindings/dma/milbeaut-m10v-hdmac.txt | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt

diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
new file mode 100644
index 000000000000..a104fcb9e73d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
@@ -0,0 +1,51 @@
+* Milbeaut AHB DMA Controller
+
+Milbeaut AHB DMA controller has transfer capability bellow.
+ - memory to memory transfer
+ - device to memory transfer
+ - memory to device transfer
+
+Required property:
+- compatible: Should be "socionext,milbeaut-m10v-hdmac"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+- #dma-cells: Should be 1. Specify the ID of the slave.
+- clocks: Phandle to the clock used by the HDMAC module.
+
+
+Example:
+
+ hdmac1: hdmac@1e110000 {
+ compatible = "socionext,milbeaut-m10v-hdmac";
+ reg = <0x1e110000 0x10000>;
+ interrupts = <0 132 4>,
+ <0 133 4>,
+ <0 134 4>,
+ <0 135 4>,
+ <0 136 4>,
+ <0 137 4>,
+ <0 138 4>,
+ <0 139 4>;
+ #dma-cells = <1>;
+ clocks = <&dummy_clk>;
+ };
+
+* DMA client
+
+Clients have to specify the DMA requests with phandles in a list.
+
+Required properties:
+- dmas: List of one or more DMA request specifiers. One DMA request specifier
+ consists of a phandle to the DMA controller followed by the integer
+ specifying the request line.
+- dma-names: List of string identifiers for the DMA requests. For the correct
+ names, have a look at the specific client driver.
+
+Example:
+
+ sni_spi1: spi@1e800100 {
+ ...
+ dmas = <&hdmac1 22>, <&hdmac1 21>;
+ dma-names = "tx", "rx";
+ ...
+ };
--
2.17.1
\
 
 \ /
  Last update: 2019-06-13 18:59    [W:0.139 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site