lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v1 1/5] of/platform: Speed up of_find_device_by_node()
From
Date
On 6/12/19 9:07 AM, Frank Rowand wrote:
> On 6/12/19 6:53 AM, Rob Herring wrote:
>> On Tue, Jun 11, 2019 at 3:52 PM Sandeep Patil <sspatil@android.com> wrote:
>>>
>>> On Tue, Jun 11, 2019 at 01:56:25PM -0700, 'Saravana Kannan' via kernel-team wrote:
>>>> On Tue, Jun 11, 2019 at 8:18 AM Frank Rowand <frowand.list@gmail.com> wrote:
>>>>>
>>>>> Hi Saravana,
>>>>>
>>>>> On 6/10/19 10:36 AM, Rob Herring wrote:
>>>>>> Why are you resending this rather than replying to Frank's last
>>>>>> comments on the original?
>>>>>
>>>>> Adding on a different aspect... The independent replies from three different
>>>>> maintainers (Rob, Mark, myself) pointed out architectural issues with the
>>>>> patch series. There were also some implementation issues brought out.
>>>>> (Although I refrained from bringing up most of my implementation issues
>>>>> as they are not relevant until architecture issues are resolved.)
>>>>
>>>> Right, I'm not too worried about the implementation issues before we
>>>> settle on the architectural issues. Those are easy to fix.
>>>>
>>>> Honestly, the main points that the maintainers raised are:
>>>> 1) This is a configuration property and not describing the device.
>>>> Just use the implicit dependencies coming from existing bindings.
>>>>
>>>> I gave a bunch of reasons for why I think it isn't an OS configuration
>>>> property. But even if that's not something the maintainers can agree
>>>> to, I gave a concrete example (cyclic dependencies between clock
>>>> provider hardware) where the implicit dependencies would prevent one
>>>> of the devices from probing till the end of time. So even if the
>>>> maintainers don't agree we should always look at "depends-on" to
>>>> decide the dependencies, we still need some means to override the
>>>> implicit dependencies where they don't match the real dependency. Can
>>>> we use depends-on as an override when the implicit dependencies aren't
>>>> correct?
>>>>
>>>> 2) This doesn't need to be solved because this is just optimizing
>>>> probing or saving power ("we should get rid of this auto disabling"):
>>>>
>>>> I explained why this patch series is not just about optimizing probe
>>>> ordering or saving power. And why we can't ignore auto disabling
>>>> (because it's more than just auto disabling). The kernel is currently
>>>> broken when trying to use modules in ARM SoCs (probably in other
>>>> systems/archs too, but I can't speak for those).
>>>>
>>>> 3) Concerns about backwards compatibility
>>>>
>>>> I pointed out why the current scheme (depends-on being the only source
>>>> of dependency) doesn't break compatibility. And if we go with
>>>> "depends-on" as an override what we could do to keep backwards
>>>> compatibility. Happy to hear more thoughts or discuss options.
>>>>
>>>> 4) How the "sync_state" would work for a device that supplies multiple
>>>> functionalities but a limited driver.
>>>
>>> <snip>
>>> To be clear, all of above are _real_ problems that stops us from efficiently
>>> load device drivers as modules for Android.
>>>
>>> So, if 'depends-on' doesn't seem like the right approach and "going back to
>>> the drawing board" is the ask, could you please point us in the right
>>> direction?
>>
>> Use the dependencies which are already there in DT. That's clocks,
>> pinctrl, regulators, interrupts, gpio at a minimum. I'm simply not
>> going to accept duplicating all those dependencies in DT. The downside
>> for the kernel is you have to address these one by one and can't have
>> a generic property the driver core code can parse. After that's in
>> place, then maybe we can consider handling any additional dependencies
>> not already captured in DT. Once all that is in place, we can probably
>> sort device and/or driver lists to optimize the probe order (maybe the
>> driver core already does that now?).
>>
>> Get rid of the auto disabling of clocks and regulators in
>> late_initcall. It's simply not a valid marker that boot is done when
>> modules are involved. We probably can't get rid of it as lot's of
>> platforms rely on that, so it will have to be opt out. Make it the
>> platform's responsibility for ensuring a consistent state.
>
> Setting aside modules for one moment, why is there any auto disabling
> of clocks and regulators in late initcall???? Deferred probe processing
> does not begin until deferred_probe_initcall() sets

I failed to mention that deferred_probe_initcall() is a late_initcall.

-Frank

> driver_deferred_probe_enable to true. No late_initcall function
> should ever depend on ordering with respect to any other late_initcall.
> (And yes, I know that among various initcall levels, there have been
> games played to get a certain amount of ordering, but that is at
> best fragile.)
>
> In addition to modules, devicetree overlays need to be considered.
>
> Just as modules can result in a driver appearing after boot finishes,
> overlays can result in new devicetree nodes (and thus dependencies)
> appearing after boot finishes.
>
> -Frank
>
>>
>> Perhaps we need a 'boot done' or 'stop deferring probe' trigger from
>> userspace in order to make progress if dependencies are missing. Or
>> maybe just some timeout would be sufficient. I think this is probably
>> more useful for development than in a shipping product. Even if you
>> could fallback to polling mode instead of interrupts for example, I
>> doubt you would want to in a product.
>>
>> You should also keep in mind that everything needed for a console has
>> to be built in. Maybe Android can say the console isn't needed, but in
>> general we can't.
>>
>> Rob
>> .
>>
>
>

\
 
 \ /
  Last update: 2019-06-12 18:48    [W:0.065 / U:6.176 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site