lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: zynqmp: Add ZynqMP SDHCI compatible string
From
Date
On 11. 06. 19 12:07, Manish Narani wrote:
> Add the new compatible string for ZynqMP SD Host Controller for its use
> in the Arasan SDHCI driver for some of the ZynqMP specific operations.
> Add required properties for the same.
>
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> ---
> This patch depends on the below series of patches:
> https://lkml.org/lkml/2019/6/11/286
> ---
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 9aa6734..6da5b82 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -493,21 +493,25 @@
> };
>
> sdhci0: mmc@ff160000 {
> - compatible = "arasan,sdhci-8.9a";
> + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
> status = "disabled";
> interrupt-parent = <&gic>;
> interrupts = <0 48 4>;
> reg = <0x0 0xff160000 0x0 0x1000>;
> clock-names = "clk_xin", "clk_ahb";
> + clock-output-names = "clk_sd0";
> + #clock-cells = <0>;
> };
>
> sdhci1: mmc@ff170000 {
> - compatible = "arasan,sdhci-8.9a";
> + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
> status = "disabled";
> interrupt-parent = <&gic>;
> interrupts = <0 49 4>;
> reg = <0x0 0xff170000 0x0 0x1000>;
> clock-names = "clk_xin", "clk_ahb";
> + clock-output-names = "clk_sd1";
> + #clock-cells = <0>;
> };
>
> smmu: smmu@fd800000 {
>

note: I am waiting when binding is acked and then this can go to my tree.

Thanks,
Michal



\
 
 \ /
  Last update: 2019-06-12 09:06    [W:0.025 / U:36.216 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site