lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v1 1/1] watchdog: atmel: atmel-sama5d4-wdt: Disable watchdog on system suspend
Date
Hi Guenter,

> -----Original Message-----
> From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
> Sent: Wednesday, June 12, 2019 11:24 AM
> To: Ken Sloat <KSloat@aampglobal.com>; nicolas.ferre@microchip.com
> Cc: alexandre.belloni@bootlin.com; ludovic.desroches@microchip.com;
> wim@linux-watchdog.org; linux-arm-kernel@lists.infradead.org; linux-
> watchdog@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v1 1/1] watchdog: atmel: atmel-sama5d4-wdt: Disable
> watchdog on system suspend
>
> [This is an EXTERNAL EMAIL]
> ________________________________
>
> On 6/12/19 8:02 AM, Ken Sloat wrote:
> > From: Ken Sloat <ksloat@aampglobal.com>
> >
> > Currently, the atmel-sama5d4-wdt continues to run after system suspend.
> > Unless the system resumes within the watchdog timeout period so the
> > userspace can kick it, the system will be reset. This change disables
> > the watchdog on suspend if it is active and re-enables on resume.
> > These actions occur during the late and early phases of suspend and
> > resume respectively to minimize chances where a lock could occur while
> > the watchdog is disabled.
> >
> > Signed-off-by: Ken Sloat <ksloat@aampglobal.com>
> > ---
> > drivers/watchdog/sama5d4_wdt.c | 31
> +++++++++++++++++++++++++++++--
> > 1 file changed, 29 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/watchdog/sama5d4_wdt.c
> > b/drivers/watchdog/sama5d4_wdt.c index 111695223aae..84eb4db23993
> > 100644
> > --- a/drivers/watchdog/sama5d4_wdt.c
> > +++ b/drivers/watchdog/sama5d4_wdt.c
> > @@ -280,6 +280,18 @@ static const struct of_device_id
> sama5d4_wdt_of_match[] = {
> > MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match);
> >
> > #ifdef CONFIG_PM_SLEEP
> > +static int sama5d4_wdt_suspend_late(struct device *dev) {
> > + struct sama5d4_wdt *wdt;
> > +
> > + wdt = dev_get_drvdata(dev);
> > +
> > + if (watchdog_active(&wdt->wdd))
> > + sama5d4_wdt_stop(&wdt->wdd);
> > +
> > + return 0;
> > +}
> > +
> > static int sama5d4_wdt_resume(struct device *dev)
> > {
> > struct sama5d4_wdt *wdt = dev_get_drvdata(dev); @@ -293,10
> > +305,25 @@ static int sama5d4_wdt_resume(struct device *dev)
> >
> > return 0;
> > }
> > +
> > +static int sama5d4_wdt_resume_early(struct device *dev) {
> > + struct sama5d4_wdt *wdt;
> > +
> > + wdt = dev_get_drvdata(dev);
> > +
> > + if (watchdog_active(&wdt->wdd))
> > + sama5d4_wdt_start(&wdt->wdd);
> > +
> > + return 0;
> > +}
> > #endif
> >
> > -static SIMPLE_DEV_PM_OPS(sama5d4_wdt_pm_ops, NULL,
> > - sama5d4_wdt_resume);
> > +static const struct dev_pm_ops sama5d4_wdt_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(NULL, sama5d4_wdt_resume)
> > + SET_LATE_SYSTEM_SLEEP_PM_OPS(sama5d4_wdt_suspend_late,
> > + sama5d4_wdt_resume_early)
>
> I don't think you need both sama5d4_wdt_resume() and
> sama5d4_wdt_resume_early().

Yes I was wondering about that but wanted feedback on the subject first.
I can simply consolidate the statements, the sama5d4_wdt_init statement
present now should probably be called first anyways, so something like this
within resume_early:

struct sama5d4_wdt = dev_get_drvdata(dev);

sama5d4_wdt_init(wdt);

if (watchdog_active(&wdt->wdd))
sama5d4_wdt_start(&wdt->wdd);

return 0;

If that sounds good I will resubmit.

> Guenter
>
> > +};
> >
> > static struct platform_driver sama5d4_wdt_driver = {
> > .probe = sama5d4_wdt_probe,
> >

Thanks,
Ken Sloat

\
 
 \ /
  Last update: 2019-06-12 17:31    [W:0.502 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site