lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
On Wed, Jun 12, 2019 at 03:36:25PM +0200, Ulf Hansson wrote:
> On Mon, 10 Jun 2019 at 20:54, Raul E Rangel <rrangel@chromium.org> wrote:
> >
> > sdhci_send_tuning uses mmc->ios.bus_width to determine the block size.
> > Without this patch the block size would be set incorrectly when the
> > bus_width == 8 which results in tuning failing.
> >
> > Signed-off-by: Raul E Rangel <rrangel@chromium.org>
> > ---
> >
> > drivers/mmc/host/sdhci-pci-o2micro.c | 5 ++++-
> > 1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> > index b29bf4e7dcb48..dd21315922c87 100644
> > --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> > +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> > @@ -115,6 +115,7 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> > */
> > if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
> > current_bus_width = mmc->ios.bus_width;
> > + mmc->ios.bus_width = MMC_BUS_WIDTH_4;
>
> This looks wrong.
>
> mmc->ios.bus_width is not supposed to be updated by a host driver, but
I guess I left this part out: The O2Micro controller only supports
tuning at 4-bits. So the host driver needs to change the bus width while
tuning and then set it back when done. Ideally I would have used
`mmc_set_bus_width()`, but that is a core only function.

If `sdhci_send_tuning()` didn't rely on mmc->ios.bus_width to determine
the bus width, but instead read the HOST_CONTROL register then this
patch wouldn't be needed.
> rather the value should only be read.
>
> > sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
> > }
> >
> > @@ -126,8 +127,10 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> >
> > sdhci_end_tuning(host);
> >
> > - if (current_bus_width == MMC_BUS_WIDTH_8)
> > + if (current_bus_width == MMC_BUS_WIDTH_8) {
> > + mmc->ios.bus_width = MMC_BUS_WIDTH_8;
>
> Ditto.
>
> > sdhci_set_bus_width(host, current_bus_width);
> > + }
> >
> > host->flags &= ~SDHCI_HS400_TUNING;
> > return 0;
> > --
> > 2.22.0.rc2.383.gf4fbbf30c2-goog
> >
>
> Kind regards
> Uffe
Thanks for the review!

\
 
 \ /
  Last update: 2019-06-12 17:02    [W:0.102 / U:46.128 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site