lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] gsmi: Replace printk with relevant pr_<level>
From 3a9cec48147b24fd9d793e0fdf20058461445646 Mon Sep 17 00:00:00 2001
From: Saiyam Doshi <saiyamdoshi.in@gmail.com>
Date: Tue, 11 Jun 2019 19:21:50 +0530
Subject: [PATCH] gsmi: Replace printk with relevant pr_<level>

Replace printk() with pr_* macros for logging consistency.
This also helps avoid checkpatch warnings.

Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com>
---
drivers/firmware/google/gsmi.c | 59 ++++++++++++++++------------------
1 file changed, 28 insertions(+), 31 deletions(-)

diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index edaa4e5d84ad..e4e7f04bced8 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -151,7 +151,7 @@ static struct gsmi_buf *gsmi_buf_alloc(void)

smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL);
if (!smibuf) {
- printk(KERN_ERR "gsmi: out of memory\n");
+ pr_err("gsmi: out of memory\n");
return NULL;
}

@@ -159,7 +159,7 @@ static struct gsmi_buf *gsmi_buf_alloc(void)
smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL,
&smibuf->handle);
if (!smibuf->start) {
- printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+ pr_err("gsmi: failed to allocate name buffer\n");
kfree(smibuf);
return NULL;
}
@@ -257,34 +257,33 @@ static int gsmi_exec(u8 func, u8 sub)
rc = 1;
break;
case GSMI_INVALID_PARAMETER:
- printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
+ pr_err("gsmi: exec 0x%04x: Invalid parameter\n", cmd);
rc = -EINVAL;
break;
case GSMI_BUFFER_TOO_SMALL:
- printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
+ pr_err("gsmi: exec 0x%04x: Buffer too small\n", cmd);
rc = -ENOMEM;
break;
case GSMI_UNSUPPORTED:
case GSMI_UNSUPPORTED2:
if (sub != GSMI_CMD_HANDSHAKE_TYPE)
- printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
- cmd);
+ pr_err("gsmi: exec 0x%04x: Not supported\n", cmd);
rc = -ENOSYS;
break;
case GSMI_NOT_READY:
- printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
+ pr_err("gsmi: exec 0x%04x: Not ready\n", cmd);
rc = -EBUSY;
break;
case GSMI_DEVICE_ERROR:
- printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
+ pr_err("gsmi: exec 0x%04x: Device error\n", cmd);
rc = -EFAULT;
break;
case GSMI_NOT_FOUND:
- printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
+ pr_err("gsmi: exec 0x%04x: Data not found\n", cmd);
rc = -ENOENT;
break;
case GSMI_LOG_FULL:
- printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
+ pr_err("gsmi: exec 0x%04x: Log full\n", cmd);
rc = -ENOSPC;
break;
case GSMI_HANDSHAKE_CF:
@@ -293,7 +292,7 @@ static int gsmi_exec(u8 func, u8 sub)
rc = result;
break;
default:
- printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
+ pr_err("gsmi: exec 0x%04x: Unknown error 0x%04x\n",
cmd, result);
rc = -ENXIO;
}
@@ -341,7 +340,7 @@ static efi_status_t gsmi_get_variable(efi_char16_t *name,

rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR);
if (rc < 0) {
- printk(KERN_ERR "gsmi: Get Variable failed\n");
+ pr_err("gsmi: Get Variable failed\n");
ret = EFI_LOAD_ERROR;
} else if (rc == 1) {
/* variable was not found */
@@ -403,7 +402,7 @@ static efi_status_t gsmi_get_next_variable(unsigned long *name_size,

rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR);
if (rc < 0) {
- printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
+ pr_err("gsmi: Get Next Variable Name failed\n");
ret = EFI_LOAD_ERROR;
} else if (rc == 1) {
/* variable not found -- end of list */
@@ -467,7 +466,7 @@ static efi_status_t gsmi_set_variable(efi_char16_t *name,

rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR);
if (rc < 0) {
- printk(KERN_ERR "gsmi: Set Variable failed\n");
+ pr_err("gsmi: Set Variable failed\n");
ret = EFI_INVALID_PARAMETER;
}

@@ -517,7 +516,7 @@ static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,

rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
if (rc < 0)
- printk(KERN_ERR "gsmi: Set Event Log failed\n");
+ pr_err("gsmi: Set Event Log failed\n");

spin_unlock_irqrestore(&gsmi_dev.lock, flags);

@@ -645,10 +644,9 @@ static int gsmi_shutdown_reason(int reason)
spin_unlock_irqrestore(&gsmi_dev.lock, flags);

if (rc < 0)
- printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
+ pr_err("gsmi: Log Shutdown Reason failed\n");
else
- printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
- reason);
+ pr_emerg("gsmi: Log Shutdown Reason 0x%02x\n", reason);

return rc;
}
@@ -759,7 +757,7 @@ static __init int gsmi_system_valid(void)
* whitewash our board names out of the public driver.
*/
if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) {
- printk(KERN_INFO "gsmi: Board is too old\n");
+ pr_info("gsmi: Board is too old\n");
return -ENODEV;
}

@@ -879,7 +877,7 @@ static __init int gsmi_init(void)
#ifdef CONFIG_PM
ret = platform_driver_register(&gsmi_driver_info);
if (unlikely(ret)) {
- printk(KERN_ERR "gsmi: unable to register platform driver\n");
+ pr_err("gsmi: unable to register platform driver\n");
return ret;
}
#endif
@@ -887,7 +885,7 @@ static __init int gsmi_init(void)
/* register device */
gsmi_dev.pdev = platform_device_register_full(&gsmi_dev_info);
if (IS_ERR(gsmi_dev.pdev)) {
- printk(KERN_ERR "gsmi: unable to register platform device\n");
+ pr_err("gsmi: unable to register platform device\n");
return PTR_ERR(gsmi_dev.pdev);
}

@@ -906,19 +904,19 @@ static __init int gsmi_init(void)
*/
gsmi_dev.name_buf = gsmi_buf_alloc();
if (!gsmi_dev.name_buf) {
- printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+ pr_err("gsmi: failed to allocate name buffer\n");
goto out_err;
}

gsmi_dev.data_buf = gsmi_buf_alloc();
if (!gsmi_dev.data_buf) {
- printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
+ pr_err("gsmi: failed to allocate data buffer\n");
goto out_err;
}

gsmi_dev.param_buf = gsmi_buf_alloc();
if (!gsmi_dev.param_buf) {
- printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
+ pr_err("gsmi: failed to allocate param buffer\n");
goto out_err;
}

@@ -960,8 +958,7 @@ static __init int gsmi_init(void)

/* Remove and clean up gsmi if the handshake could not complete. */
if (gsmi_dev.handshake_type == -ENXIO) {
- printk(KERN_INFO "gsmi version " DRIVER_VERSION
- " failed to load\n");
+ pr_info("gsmi version " DRIVER_VERSION " failed to load\n");
ret = -ENODEV;
goto out_err;
}
@@ -970,28 +967,28 @@ static __init int gsmi_init(void)
ret = -ENOMEM;
gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj);
if (!gsmi_kobj) {
- printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
+ pr_info("gsmi: Failed to create firmware kobj\n");
goto out_err;
}

/* Setup eventlog access */
ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr);
if (ret) {
- printk(KERN_INFO "gsmi: Failed to setup eventlog");
+ pr_info("gsmi: Failed to setup eventlog");
goto out_err;
}

/* Other attributes */
ret = sysfs_create_files(gsmi_kobj, gsmi_attrs);
if (ret) {
- printk(KERN_INFO "gsmi: Failed to add attrs");
+ pr_info("gsmi: Failed to add attrs");
goto out_remove_bin_file;
}

#ifdef CONFIG_EFI_VARS
ret = efivars_register(&efivars, &efivar_ops, gsmi_kobj);
if (ret) {
- printk(KERN_INFO "gsmi: Failed to register efivars\n");
+ pr_info("gsmi: Failed to register efivars\n");
sysfs_remove_files(gsmi_kobj, gsmi_attrs);
goto out_remove_bin_file;
}
@@ -1002,7 +999,7 @@ static __init int gsmi_init(void)
atomic_notifier_chain_register(&panic_notifier_list,
&gsmi_panic_notifier);

- printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
+ pr_info("gsmi version " DRIVER_VERSION " loaded\n");

return 0;

--
2.20.1
\
 
 \ /
  Last update: 2019-06-12 16:28    [W:0.038 / U:19.068 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site