[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/6] I2C: DWC3 USB: Add support for ACPI based AArch64 Laptops
This patch-set ensures the kernel is bootable on the newly released
AArch64 based Laptops using ACPI configuration tables. The Pinctrl
changes have been accepted, leaving only I2C (keyboard, touchpad,
touchscreen, fingerprint, etc, HID device) and USB (root filesystem,
camera, networking, etc) enablement.

* Collecting Acks
* Adding Andy Gross' new email
* Removing applied Pinctrl patches

Lee Jones (6):
i2c: i2c-qcom-geni: Provide support for ACPI
i2c: i2c-qcom-geni: Signify successful driver probe
soc: qcom: geni: Add support for ACPI
usb: dwc3: qcom: Add support for booting with ACPI
usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
usb: dwc3: qcom: Improve error handling

drivers/i2c/busses/i2c-qcom-geni.c | 17 ++-
drivers/soc/qcom/qcom-geni-se.c | 21 ++-
drivers/usb/dwc3/Kconfig | 2 +-
drivers/usb/dwc3/dwc3-qcom.c | 221 +++++++++++++++++++++++++----
4 files changed, 225 insertions(+), 36 deletions(-)


 \ /
  Last update: 2019-06-12 16:27    [W:0.042 / U:2.024 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site