lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] PCI: altera: Fix configuration type based on secondary number
Date
This fix issue when access config from PCIe switch.

Stratix 10 PCIe controller does not support Type 1 to Type 0 conversion
as previous version (V1) does.

The PCIe controller need to send Type 0 config TLP if the targeting bus
matches with the secondary bus number, which is when the TLP is targeting
the immediate device on the link.

The PCIe controller send Type 1 config TLP if the targeting bus is
larger than the secondary bus, which is when the TLP is targeting the
device not immediate on the link.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

---
v2:
- Add get_tlp_header() function.
---
drivers/pci/controller/pcie-altera.c | 41 ++++++++++++++++++----------
1 file changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
index 27222071ace7..d2497ca43828 100644
--- a/drivers/pci/controller/pcie-altera.c
+++ b/drivers/pci/controller/pcie-altera.c
@@ -44,6 +44,8 @@
#define S10_RP_RXCPL_STATUS 0x200C
#define S10_RP_CFG_ADDR(pcie, reg) \
(((pcie)->hip_base) + (reg) + (1 << 20))
+#define S10_RP_SECONDARY(pcie) \
+ readb(S10_RP_CFG_ADDR(pcie, PCI_SECONDARY_BUS))

/* TLP configuration type 0 and 1 */
#define TLP_FMTTYPE_CFGRD0 0x04 /* Configuration Read Type 0 */
@@ -55,14 +57,9 @@
#define TLP_WRITE_TAG 0x10
#define RP_DEVFN 0
#define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn))
-#define TLP_CFGRD_DW0(pcie, bus) \
- ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgrd0 \
- : pcie->pcie_data->cfgrd1) << 24) | \
- TLP_PAYLOAD_SIZE)
-#define TLP_CFGWR_DW0(pcie, bus) \
- ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgwr0 \
- : pcie->pcie_data->cfgwr1) << 24) | \
- TLP_PAYLOAD_SIZE)
+#define TLP_CFG_DW0(pcie, cfg) \
+ (((cfg) << 24) | \
+ TLP_PAYLOAD_SIZE)
#define TLP_CFG_DW1(pcie, tag, be) \
(((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be))
#define TLP_CFG_DW2(bus, devfn, offset) \
@@ -322,14 +319,31 @@ static void s10_tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
s10_tlp_write_tx(pcie, data, RP_TX_EOP);
}

+static void get_tlp_header(struct altera_pcie *pcie, u8 bus, u32 devfn,
+ int where, u8 byte_en, bool read, u32 *headers)
+{
+ u8 cfg;
+ u8 cfg0 = read ? pcie->pcie_data->cfgrd0 : pcie->pcie_data->cfgwr0;
+ u8 cfg1 = read ? pcie->pcie_data->cfgrd1 : pcie->pcie_data->cfgwr1;
+ u8 tag = read ? TLP_READ_TAG : TLP_WRITE_TAG;
+
+ if (pcie->pcie_data->version == ALTERA_PCIE_V1)
+ cfg = (bus == pcie->root_bus_nr) ? cfg0 : cfg1;
+ else
+ cfg = (bus > S10_RP_SECONDARY(pcie)) ? cfg0 : cfg1;
+
+ headers[0] = TLP_CFG_DW0(pcie, cfg);
+ headers[1] = TLP_CFG_DW1(pcie, tag, byte_en);
+ headers[2] = TLP_CFG_DW2(bus, devfn, where);
+}
+
static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn,
int where, u8 byte_en, u32 *value)
{
u32 headers[TLP_HDR_SIZE];

- headers[0] = TLP_CFGRD_DW0(pcie, bus);
- headers[1] = TLP_CFG_DW1(pcie, TLP_READ_TAG, byte_en);
- headers[2] = TLP_CFG_DW2(bus, devfn, where);
+ get_tlp_header(pcie, bus, devfn, where, byte_en, true,
+ headers);

pcie->pcie_data->ops->tlp_write_pkt(pcie, headers, 0, false);

@@ -342,9 +356,8 @@ static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
u32 headers[TLP_HDR_SIZE];
int ret;

- headers[0] = TLP_CFGWR_DW0(pcie, bus);
- headers[1] = TLP_CFG_DW1(pcie, TLP_WRITE_TAG, byte_en);
- headers[2] = TLP_CFG_DW2(bus, devfn, where);
+ get_tlp_header(pcie, bus, devfn, where, byte_en, false,
+ headers);

/* check alignment to Qword */
if ((where & 0x7) == 0)
--
2.19.0
\
 
 \ /
  Last update: 2019-06-12 08:42    [W:0.031 / U:18.156 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site