lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] dt-bindings: regulator: Add labibb regulator
Date
Adding the devicetree binding for labibb regulator.

Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
---
.../bindings/regulator/qcom-labibb-regulator.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.txt
new file mode 100644
index 0000000..79aad6f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.txt
@@ -0,0 +1,57 @@
+Qualcomm's LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) Regulator
+
+LAB can be used as a positive boost power supply and IBB can be used as a negative
+boost power supply for display panels.
+
+Main node required properties:
+
+- compatible: Must be:
+ "qcom,lab-ibb-regulator"
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+
+LAB subnode required properties:
+
+- reg: Specifies the SPMI address and size for this peripheral.
+- regulator-name: A string used to describe the regulator.
+- interrupts: Specify the interrupts as per the interrupt
+ encoding.
+- interrupt-names: Interrupt names to match up 1-to-1 with
+ the interrupts specified in 'interrupts'
+ property.
+
+IBB subnode required properties:
+
+- reg: Specifies the SPMI address and size for this peripheral.
+- regulator-name: A string used to describe the regulator.
+- interrupts: Specify the interrupts as per the interrupt
+ encoding.
+- interrupt-names: Interrupt names to match up 1-to-1 with
+ the interrupts specified in 'interrupts'
+ property.
+
+Example:
+ pmi8998_lsid1: pmic@3 {
+ qcom-labibb-regulator {
+ compatible = "qcom,lab-ibb-regulator";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lab_regulator: qcom,lab@de00 {
+ reg = <0xde00>;
+ regulator-name = "lab_reg";
+
+ interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "lab-sc-err";
+ };
+
+ ibb_regulator: qcom,ibb@dc00 {
+ reg = <0xdc00>;
+ regulator-name = "ibb_reg";
+
+ interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ibb-sc-err";
+ };
+
+ };
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2019-06-12 13:01    [W:0.142 / U:3.756 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site