lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/3] mtd: spi-nor: add support for is25wp256 spi-nor flash
Date
The patch set is tested on HiFive Unleashed A00 board and is based on mainline
kernel v5.2-rc1. Its intended to add support for 32 MB spi-nor flash
mounted on the board. Memory Device supports 4/32/ and 64 KB sectors size.
The device id table is updated accordingly.

Flash parameter table for ISSI device is set to use macronix_quad_enable
procedure to set the QE (quad-enable) bit of Status register.

A unilaterlay block unlocking scheme is added in patch 2.

These patches are based on original work done by Wesley Terpstra and/or Palmer Dabbelt:
https://github.com/riscv/riscv-linux/commit/c94e267766d62bc9a669611c3d0c8ed5ea26569b

Erase/Read/Write operations are verified on HiFive Unleashed board using mtd and flash utils (v1.5.2):
1. mtd_debug :Options available are : erase/read/write.
2. flashcp :Single utility that erases flash, writes a file to flash and verifies the data back.
3. flash_unlock: Unlock flash memory blocks.Arguments: are offset and number of blocks.
3. flash_lock: Lock flash memory blocks. Arguments: are offset and number of blocks.

Unlock scheme clears the protection bits of all blocks in the Status register.

Lock scheme:
A basic implementation based on stm_lock scheme and is validated for different number of blocks passed
to flash_lock. ISSI devices have Top/Bottom area selection in "function register" which is OTP memory.


Revision history:

V4<->V5:
-Rebased to linux version v5.2-rc1.
-Updated heading of this cover letter with sub-system, instead of just plain "add support for is25wp256..."

V3<->V4:
-Extracted comman code and renamed few stm functions so that it can be reused for issi lock implementation.
-Added function's to read and write FR register, for selecting Top/Bottom area.

V2<->V3:
-Rebased patch to mainline v5.1 from earlier v5.1-rc5.
-Updated commit messages, and cover letter with reference to git URL and author information.
-Deferred flash_lock mechanism and can go as separate patch.

V1<-> V2:
-Incorporated changes suggested by reviewers regarding patch/cover letter versioning, references of patch.
-Updated cover letter with description for flash operations verified with these changes.
-Add support for unlocking is25xxxxxx device.
-Add support for locking is25xxxxxx device.

v1:
-Add support for is25wp256 device.


Sagar Shrikant Kadam (3):
mtd: spi-nor: add support for is25wp256
mtd: spi-nor: add support to unlock flash device
mtd: spi-nor: add locking support for is25xxxxx device

drivers/mtd/spi-nor/spi-nor.c | 348 +++++++++++++++++++++++++++++++++++-------
include/linux/mtd/spi-nor.h | 7 +
2 files changed, 304 insertions(+), 51 deletions(-)

--
1.9.1

\
 
 \ /
  Last update: 2019-06-12 12:49    [W:0.108 / U:9.456 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site