lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1
On Thu, Jun 06, 2019 at 12:06:12PM +0300, Igor Opaniuk wrote:
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
>
> Allows to use the SD interface at a higher speed mode if the card
> supports it. For this the signaling voltage is switched from 3.3V to
> 1.8V under the usdhc1's drivers control.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>

Applied, thanks.

\
 
 \ /
  Last update: 2019-06-12 12:46    [W:0.040 / U:17.360 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site