lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] mt76: mt7615: add support for per-chain signal strength reporting
> Fill in RX status->chain_signal to avoid empty value.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> Changes since v2 - correct calculation sequence
> ---
> .../net/wireless/mediatek/mt76/mt7615/mac.c | 30 ++++++++++++++++++-
> .../net/wireless/mediatek/mt76/mt7615/mac.h | 5 ++++
> 2 files changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
> index b60d42b5923d..2f49a99e77b1 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
> @@ -13,6 +13,11 @@
> #include "../dma.h"
> #include "mac.h"
>

[...]

> @@ -169,7 +175,29 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb)
>
> status->enc_flags |= RX_ENC_FLAG_STBC_MASK * stbc;
>
> - /* TODO: RSSI */
> + status->chains = dev->mt76.antenna_mask;
> + status->chain_signal[0] = to_rssi(MT_RXV4_RCPI0, rxdg3);
> + status->chain_signal[1] = to_rssi(MT_RXV4_RCPI1, rxdg3);
> + status->chain_signal[2] = to_rssi(MT_RXV4_RCPI2, rxdg3);
> + status->chain_signal[3] = to_rssi(MT_RXV4_RCPI3, rxdg3);
> + status->signal = status->chain_signal[0];
> +
> + switch (status->chains) {
> + case 0xf:
> + status->signal = max(status->signal,
> + status->chain_signal[3]);
> + /* fall through */
> + case 0x7:
> + status->signal = max(status->signal,
> + status->chain_signal[2]);
> + /* fall through */
> + case 0x3:
> + status->signal = max(status->signal,
> + status->chain_signal[1]);
> + break;
> + default:
> + break;
> + }

is it possible to enable rx chains selectively (e.g. chain 0 and 2)?
If so we can do something like:

for (i = 1; i < hweight8(dev->mt76.antenna_mask); i++) {
if (!(status->chains & BIT(i)))
continue;

status->signal = max(status->signal,
status->chain_signal[i]);
}

Regards,
Lorenzo

> rxd += 6;
> if ((u8 *)rxd - skb->data >= skb->len)
> return -EINVAL;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h
> index 18ad4b8a3807..b00ce8db58e9 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h
> @@ -98,6 +98,11 @@ enum rx_pkt_type {
> #define MT_RXV2_GROUP_ID GENMASK(26, 21)
> #define MT_RXV2_LENGTH GENMASK(20, 0)
>
> +#define MT_RXV4_RCPI3 GENMASK(31, 24)
> +#define MT_RXV4_RCPI2 GENMASK(23, 16)
> +#define MT_RXV4_RCPI1 GENMASK(15, 8)
> +#define MT_RXV4_RCPI0 GENMASK(7, 0)
> +
> enum tx_header_format {
> MT_HDR_FORMAT_802_3,
> MT_HDR_FORMAT_CMD,
> --
> 2.18.0
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-06-12 10:38    [W:0.037 / U:5.468 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site