lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 6/7] dt-bindings: Add ANX6345 DP/eDP transmitter binding
From
Date
On 04.06.2019 14:23, Torsten Duwe wrote:
> The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed
> for portable devices.
>
> Add a binding document for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Torsten Duwe <duwe@suse.de>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> .../devicetree/bindings/display/bridge/anx6345.txt | 57 ++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.txt b/Documentation/devicetree/bindings/display/bridge/anx6345.txt
> new file mode 100644
> index 000000000000..bd63f6ac107e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.txt
> @@ -0,0 +1,57 @@
> +Analogix ANX6345 eDP Transmitter
> +--------------------------------
> +
> +The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
> +portable devices.
> +
> +Required properties:
> +
> + - compatible : "analogix,anx6345"
> + - reg : I2C address of the device
> + - reset-gpios : Which GPIO to use for reset


You have not specified it's active state, since in driver's code you
named it RESETN I guess it should be active low.


> + - dvdd12-supply : Regulator for 1.2V digital core power.
> + - dvdd25-supply : Regulator for 2.5V digital core power.
> + - Video port for LVTTL input, using the DT bindings defined in [1].


Please assign port number for input (I guess 0).


> +
> +Optional properties:
> +
> + - Video port for eDP output (panel or connector) using the DT bindings
> + defined in [1].


Shouldn't it be also required?


Regards

Andrzej


> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +
> +anx6345: anx6345@38 {
> + compatible = "analogix,anx6345";
> + reg = <0x38>;
> + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
> + dvdd25-supply = <&reg_dldo2>;
> + dvdd12-supply = <&reg_fldo1>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + anx6345_in: port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + anx6345_in_tcon0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&tcon0_out_anx6345>;
> + };
> + };
> +
> + anx6345_out: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + anx6345_out_panel: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&panel_in_edp>;
> + };
> + };
> + };
> +};


\
 
 \ /
  Last update: 2019-06-12 10:17    [W:0.060 / U:33.996 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site