lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 0/2] dw-mipi-dsi: add power on & off optional phy ops and update stm
From
Date
On 27.05.2019 12:21, Yannick Fertré wrote:
> These patches fix a bug concerning an access issue to display controler (ltdc)
> registers.
> If the physical layer of the DSI is started too early then the fifo DSI are full
> very quickly which implies ltdc register's access hang up. To avoid this
> problem, it is necessary to start the DSI physical layer only when the bridge
> is enable.
>
> Yannick Fertré (2):
> drm/bridge/synopsys: dsi: add power on/off optional phy ops
> drm/stm: dsi: add power on/off phy ops
>
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 8 ++++++++
> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 21 ++++++++++++++++++++-
> include/drm/bridge/dw_mipi_dsi.h | 2 ++
> 3 files changed, 30 insertions(+), 1 deletion(-)
>
> --
> 2.7.4
>
>
>
Queued both patches to drm-misc-next.

--
Regards
Andrzej

\
 
 \ /
  Last update: 2019-06-12 09:18    [W:0.061 / U:0.012 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site