lkml.org 
[lkml]   [2019]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH-next 10/20] gpio: gpio-omap: simplify set_multiple()
Date
From: Russell King <rmk+kernel@armlinux.org.uk>

One of the reasons for set_multiple() to exist is to allow multiple
GPIOs on the same chip to be changed simultaneously - see commit
5f42424354f5 ("gpiolib: allow simultaneous setting of multiple GPIO
outputs"):

- Simultaneous glitch-free setting of multiple pins on any kind of
parallel bus attached to GPIOs provided they all reside on the
same chip and bank.

In order for this to work, we should not use the atomic set/clear
registers, but instead read-modify-write the dataout register. We
already take the spinlock to ensure that happens atomically, so
move the code into the set_multiple() function and kill the two
helper functions.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/gpio/gpio-omap.c | 45 +++++++---------------------------------
1 file changed, 7 insertions(+), 38 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index a26decc5c611..8fdac6e4a929 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -74,8 +74,6 @@ struct gpio_bank {
int context_loss_count;

void (*set_dataout)(struct gpio_bank *bank, unsigned gpio, int enable);
- void (*set_dataout_multiple)(struct gpio_bank *bank,
- unsigned long *mask, unsigned long *bits);
int (*get_context_loss_count)(struct device *dev);

struct omap_gpio_reg_offs *regs;
@@ -146,35 +144,6 @@ static void omap_set_gpio_dataout_mask(struct gpio_bank *bank, unsigned offset,
bank->context.dataout = l;
}

-/* set multiple data out values using dedicate set/clear register */
-static void omap_set_gpio_dataout_reg_multiple(struct gpio_bank *bank,
- unsigned long *mask,
- unsigned long *bits)
-{
- void __iomem *reg = bank->base;
- u32 l;
-
- l = *bits & *mask;
- writel_relaxed(l, reg + bank->regs->set_dataout);
- bank->context.dataout |= l;
-
- l = ~*bits & *mask;
- writel_relaxed(l, reg + bank->regs->clr_dataout);
- bank->context.dataout &= ~l;
-}
-
-/* set multiple data out values using mask register */
-static void omap_set_gpio_dataout_mask_multiple(struct gpio_bank *bank,
- unsigned long *mask,
- unsigned long *bits)
-{
- void __iomem *reg = bank->base + bank->regs->dataout;
- u32 l = (readl_relaxed(reg) & ~*mask) | (*bits & *mask);
-
- writel_relaxed(l, reg);
- bank->context.dataout = l;
-}
-
static inline void omap_gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
{
int l = readl_relaxed(base + reg);
@@ -1037,10 +1006,14 @@ static void omap_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask,
unsigned long *bits)
{
struct gpio_bank *bank = gpiochip_get_data(chip);
+ void __iomem *reg = bank->base + bank->regs->dataout;
unsigned long flags;
+ u32 l;

raw_spin_lock_irqsave(&bank->lock, flags);
- bank->set_dataout_multiple(bank, mask, bits);
+ l = (readl_relaxed(reg) & ~*mask) | (*bits & *mask);
+ writel_relaxed(l, reg);
+ bank->context.dataout = l;
raw_spin_unlock_irqrestore(&bank->lock, flags);
}

@@ -1530,14 +1503,10 @@ static int omap_gpio_probe(struct platform_device *pdev)
pdata->get_context_loss_count;
}

- if (bank->regs->set_dataout && bank->regs->clr_dataout) {
+ if (bank->regs->set_dataout && bank->regs->clr_dataout)
bank->set_dataout = omap_set_gpio_dataout_reg;
- bank->set_dataout_multiple = omap_set_gpio_dataout_reg_multiple;
- } else {
+ else
bank->set_dataout = omap_set_gpio_dataout_mask;
- bank->set_dataout_multiple =
- omap_set_gpio_dataout_mask_multiple;
- }

raw_spin_lock_init(&bank->lock);
raw_spin_lock_init(&bank->wa_lock);
--
2.17.1
\
 
 \ /
  Last update: 2019-06-10 19:13    [W:0.172 / U:4.896 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site