lkml.org 
[lkml]   [2019]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/4] x86/kprobes: Fix frame pointer annotations
On Thu, May 09, 2019 at 10:20:30AM +0900, Masami Hiramatsu wrote:
> Hi Josh,
>
> On Wed, 8 May 2019 13:48:48 -0500
> Josh Poimboeuf <jpoimboe@redhat.com> wrote:
>
> > On Wed, May 08, 2019 at 05:39:07PM +0200, Peter Zijlstra wrote:
> > > On Wed, May 08, 2019 at 07:42:48AM -0500, Josh Poimboeuf wrote:
> > > > On Wed, May 08, 2019 at 02:04:16PM +0200, Peter Zijlstra wrote:
> > >
> > > > > Do the x86_64 variants also want some ORC annotation?
> > > >
> > > > Maybe so. Though it looks like regs->ip isn't saved. The saved
> > > > registers might need to be tweaked. I'll need to look into it.
> > >
> > > What all these sites do (and maybe we should look at unifying them
> > > somehow) is turn a CALL frame (aka RET-IP) into an exception frame (aka
> > > pt_regs).
> > >
> > > So regs->ip will be the return address (which is fixed up to be the CALL
> > > address in the handler).
> >
> > But from what I can tell, trampoline_handler() hard-codes regs->ip to
> > point to kretprobe_trampoline(), and the original return address is
> > placed in regs->sp.
> >
> > Masami, is there a reason why regs->ip doesn't have the original return
> > address and regs->sp doesn't have the original SP? I think that would
> > help the unwinder understand things.
>
> Yes, for regs->ip, there is a histrical reason. Since previously, we had
> an int3 at trampoline, so the user (kretprobe) handler expects that
> regs->ip is trampoline address and ri->ret_addr is original return address.
> It is better to check the other archs, but I think it is possible to
> change the regs->ip to original return address, since no one cares such
> "fixed address". :)
>
> For the regs->sp, there are 2 reasons.
>
> For x86-64, it's just for over-optimizing (reduce stack usage).
> I think we can make a gap for putting return address, something like
>
> "kretprobe_trampoline:\n"
> #ifdef CONFIG_X86_64
> " pushq %rsp\n" /* Make a gap for return address */
> " pushq 0(%rsp)\n" /* Copy original stack pointer */
> " pushfq\n"
> SAVE_REGS_STRING
> " movq %rsp, %rdi\n"
> " call trampoline_handler\n"
> /* Push the true return address to the bottom */
> " movq %rax, 20*8(%rsp)\n"
> RESTORE_REGS_STRING
> " popfq\n"
> " addq $8, %rsp\n" /* Skip original stack pointer */
>
> For i386 (x86-32), there is no other way to keep &regs->sp as
> the original stack pointer. It has to be changed with this series,
> maybe as same as x86-64.

Right; I already fixed that in my patch changing i386's pt_regs.

But what I'd love to do is something like the belwo patch, and make all
the trampolines (very much including ftrace) use that. Such that we then
only have 1 copy of this magic (well, 2 because x86_64 also needs an
implementation of this of course).

Changing ftrace over to this would be a little more work but it can
easily chain things a little to get its original context back:

ENTRY(ftrace_regs_caller)
GLOBAL(ftrace_regs_func)
push ftrace_stub
push ftrace_regs_handler
jmp call_to_exception_trampoline
END(ftrace_regs_caller)

typedef void (*ftrace_func_t)(unsigned long, unsigned long, struct ftrace_op *, struct pt_regs *);

struct ftrace_regs_stack {
ftrace_func_t func;
unsigned long parent_ip;
};

void ftrace_regs_handler(struct pr_regs *regs)
{
struct ftrace_regs_stack *st = (void *)regs->sp;
ftrace_func_t func = st->func;

regs->sp += sizeof(long); /* pop func */

func(regs->ip, st->parent_ip, function_trace_op, regs);
}

Hmm? I didn't look into the function_graph thing, but I imagine it can
be added without too much pain.

---
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1576,3 +1576,100 @@ ENTRY(rewind_stack_do_exit)
call do_exit
1: jmp 1b
END(rewind_stack_do_exit)
+
+/*
+ * Transforms a CALL frame into an exception frame; IOW it pretends the CALL we
+ * just did was in fact scribbled with an INT3.
+ *
+ * Use this trampoline like:
+ *
+ * PUSH $func
+ * JMP call_to_exception_trampoline
+ *
+ * $func will see regs->ip point at the CALL instruction and must therefore
+ * modify regs->ip in order to make progress (just like a normal INT3 scribbled
+ * CALL).
+ *
+ * NOTE: we do not restore any of the segment registers.
+ */
+ENTRY(call_to_exception_trampoline)
+ /*
+ * On entry the stack looks like:
+ *
+ * 2*4(%esp) <previous context>
+ * 1*4(%esp) RET-IP
+ * 0*4(%esp) func
+ *
+ * transform this into:
+ *
+ * 19*4(%esp) <previous context>
+ * 18*4(%esp) gap / RET-IP
+ * 17*4(%esp) gap / func
+ * 16*4(%esp) ss
+ * 15*4(%esp) sp / <previous context>
+ * 14*4(%esp) flags
+ * 13*4(%esp) cs
+ * 12*4(%esp) ip / RET-IP
+ * 11*4(%esp) orig_eax
+ * 10*4(%esp) gs
+ * 9*4(%esp) fs
+ * 8*4(%esp) es
+ * 7*4(%esp) ds
+ * 6*4(%esp) eax
+ * 5*4(%esp) ebp
+ * 4*4(%esp) edi
+ * 3*4(%esp) esi
+ * 2*4(%esp) edx
+ * 1*4(%esp) ecx
+ * 0*4(%esp) ebx
+ */
+ pushl %ss
+ pushl %esp # points at ss
+ addl $3*4, (%esp) # point it at <previous context>
+ pushfl
+ pushl %cs
+ pushl 5*4(%esp) # RET-IP
+ subl 5, (%esp) # point at CALL instruction
+ pushl $-1
+ pushl %gs
+ pushl %fs
+ pushl %es
+ pushl %ds
+ pushl %eax
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %edx
+ pushl %ecx
+ pushl %ebx
+
+ ENCODE_FRAME_POINTER
+
+ movl %esp, %eax # 1st argument: pt_regs
+
+ movl 17*4(%esp), %ebx # func
+ CALL_NOSPEC %ebx
+
+ movl PT_OLDESP(%esp), %eax
+
+ movl PT_EIP(%esp), %ecx
+ movl %ecx, -1*4(%eax)
+
+ movl PT_EFLAGS(%esp), %ecx
+ movl %ecx, -2*4(%eax)
+
+ movl PT_EAX(%esp), %ecx
+ movl %ecx, -3*4(%eax)
+
+ popl %ebx
+ popl %ecx
+ popl %edx
+ popl %esi
+ popl %edi
+ popl %ebp
+
+ lea -3*4(%eax), %esp
+ popl %eax
+ popfl
+ ret
+END(call_to_exception_trampoline)
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -731,29 +731,8 @@ asm(
".global kretprobe_trampoline\n"
".type kretprobe_trampoline, @function\n"
"kretprobe_trampoline:\n"
- /* We don't bother saving the ss register */
-#ifdef CONFIG_X86_64
- " pushq %rsp\n"
- " pushfq\n"
- SAVE_REGS_STRING
- " movq %rsp, %rdi\n"
- " call trampoline_handler\n"
- /* Replace saved sp with true return address. */
- " movq %rax, 19*8(%rsp)\n"
- RESTORE_REGS_STRING
- " popfq\n"
-#else
- " pushl %esp\n"
- " pushfl\n"
- SAVE_REGS_STRING
- " movl %esp, %eax\n"
- " call trampoline_handler\n"
- /* Replace saved sp with true return address. */
- " movl %eax, 15*4(%esp)\n"
- RESTORE_REGS_STRING
- " popfl\n"
-#endif
- " ret\n"
+ "push trampoline_handler\n"
+ "jmp call_to_exception_trampoline\n"
".size kretprobe_trampoline, .-kretprobe_trampoline\n"
);
NOKPROBE_SYMBOL(kretprobe_trampoline);
@@ -791,12 +770,7 @@ static __used void *trampoline_handler(s

INIT_HLIST_HEAD(&empty_rp);
kretprobe_hash_lock(current, &head, &flags);
- /* fixup registers */
- regs->cs = __KERNEL_CS;
-#ifdef CONFIG_X86_32
- regs->cs |= get_kernel_rpl();
- regs->gs = 0;
-#endif
+
/* We use pt_regs->sp for return address holder. */
frame_pointer = &regs->sp;
regs->ip = trampoline_address;
\
 
 \ /
  Last update: 2019-05-09 10:15    [W:1.378 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site