lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 4/7] nvme.h: add telemetry log page definisions
2019年5月8日(水) 2:28 Heitke, Kenneth <kenneth.heitke@intel.com>:
>
>
>
> On 5/7/2019 10:58 AM, Akinobu Mita wrote:
> > Copy telemetry log page definisions from nvme-cli.
> >
> > Cc: Johannes Berg <johannes@sipsolutions.net>
> > Cc: Keith Busch <keith.busch@intel.com>
> > Cc: Jens Axboe <axboe@fb.com>
> > Cc: Christoph Hellwig <hch@lst.de>
> > Cc: Sagi Grimberg <sagi@grimberg.me>
> > Cc: Minwoo Im <minwoo.im.dev@gmail.com>
> > Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> > ---
> > * v2
> > - New patch in this version.
> >
> > include/linux/nvme.h | 23 +++++++++++++++++++++++
> > 1 file changed, 23 insertions(+)
> >
> > diff --git a/include/linux/nvme.h b/include/linux/nvme.h
> > index c40720c..5217fe4 100644
> > --- a/include/linux/nvme.h
> > +++ b/include/linux/nvme.h
> > @@ -396,6 +396,28 @@ enum {
> > NVME_NIDT_UUID = 0x03,
> > };
> >
> > +/* Derived from 1.3a Figure 101: Get Log Page – Telemetry Host
> > + * -Initiated Log (Log Identifier 07h)
> > + */
> > +struct nvme_telemetry_log_page_hdr {
> > + __u8 lpi; /* Log page identifier */
> > + __u8 rsvd[4];
> > + __u8 iee_oui[3];
> > + __le16 dalb1; /* Data area 1 last block */
> > + __le16 dalb2; /* Data area 2 last block */
> > + __le16 dalb3; /* Data area 3 last block */
> > + __u8 rsvd1[368]; /* TODO verify */
>
> Remove the TODO

OK.

> > + __u8 ctrlavail; /* Controller initiated data avail?*/
> > + __u8 ctrldgn; /* Controller initiated telemetry Data Gen # */
> > + __u8 rsnident[128];
> > + /* We'll have to double fetch so we can get the header,
> > + * parse dalb1->3 determine how much size we need for the
> > + * log then alloc below. Or just do a secondary non-struct
> > + * allocation.
> > + */
>
> This comment isn't necessary. You usually can't read the entire
> telemetry log at once and the header is a fixed size. You would likely
> just read the header followed by reads of the different data areas.

This comment is derived from nvme-cli. So firstly, I'll send a patch
for nvme-cli. If the changes are accepted, I'll update this comment, too.

> > + __u8 telemetry_dataarea[0];
> > +};
> > +
> > struct nvme_smart_log {
> > __u8 critical_warning;
> > __u8 temperature[2];
> > @@ -832,6 +854,7 @@ enum {
> > NVME_LOG_FW_SLOT = 0x03,
> > NVME_LOG_CHANGED_NS = 0x04,
> > NVME_LOG_CMD_EFFECTS = 0x05,
> > + NVME_LOG_TELEMETRY_CTRL = 0x08,
> > NVME_LOG_ANA = 0x0c,
> > NVME_LOG_DISC = 0x70,
> > NVME_LOG_RESERVATION = 0x80,
> >

\
 
 \ /
  Last update: 2019-05-08 17:43    [W:0.149 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site